What You Are Working With
The Never Give Up License Plate Frame is a JDM-inspired accessory that carries the mantra embraced by Japan after the 2011 tsunami. Its custom font includes a stylized “Flying M” and a subtle garagealpha.com mark at the bottom. The frame is designed to fit standard USDM license plates, making it a straightforward addition to any vehicle, especially Mazda models and rotary enthusiasts.
Because the frame is purely decorative and does not require wiring or drilling, installation is simple. However, a few tips can help you achieve a clean, secure fit that stays put.
Installation Steps
Follow these steps to mount your Never Give Up License Plate Frame securely.
- 1. Gather your tools: You will need a screwdriver (typically Phillips head) that matches your license plate screws, and optionally a soft cloth to protect the frame finish during handling.
- 2. Remove the old plate and frame: Unscrew the existing license plate and any old frame from your vehicle. Keep the screws and mounting hardware if they are in good condition; otherwise, use new stainless steel screws to avoid rust.
- 3. Position the Never Give Up frame: Place the frame over your license plate so the custom font is readable and the garagealpha.com mark is at the bottom. The frame should sit flush against the plate without bending.
- 4. Align the screw holes: Hold the plate and frame together against the vehicle’s plate mount. Ensure the screw holes line up. If your vehicle has a recessed plate area, check that the frame does not interfere with the bumper or surrounding trim.
- 5. Secure the screws: Insert the screws and tighten them evenly by hand. Avoid overtightening, which could crack the frame or strip the screw holes. Stop when the frame is snug and does not rattle.
- 6. Final check: Step back and verify the frame is straight. Press gently on the edges to confirm it is secure. If the frame shifts, loosen the screws slightly, realign, and retighten.
Product Details
-
NEVER GIVE UP License Plate Frame: The Never Give Up License Plate Frame is made to embrace the Mazda spirit and uses a custom font with a stylized “Flying M” and a subtle garagealpha.com mark at the bottom. The custom font and mark are part of the frame’s design; make sure they are oriented correctly during installation so the message is readable.
NEVER GIVE UP License Plate Frame
-
NEVER GIVE UP License Plate Frame: The frame fits USDM license plates and is described as a perfect addition to anything. Compatibility with standard US plates means no modification is needed for most vehicles. The frame can be mounted on cars, trucks, or even display stands.
Tips for a Long-Lasting Appearance
To keep your Never Give Up frame looking fresh, wash it with mild soap and water when you clean your car. Avoid abrasive cleaners or scrubbing pads that could scratch the finish. If you live in an area with road salt or harsh weather, consider removing the frame periodically to clean behind it, preventing grime buildup.
Because the frame is made from materials typical of license plate accessories, it may show wear over time if exposed to repeated car washes with high-pressure spray. Hand washing is gentler and helps preserve the custom lettering.
