Why Use a Swivel in Your Recovery System?
Tangles and line twists during descent are a common frustration in high power rocketry. A swivel placed between your parachute and shock cord allows the parachute to rotate freely, which helps reduce tangles and promotes a smoother, more reliable recovery. The Nickel Plated Swivels offered by High Power Model Rocketry are designed specifically for this purpose, with a corrosion-resistant finish that holds up to repeated flights.
Nickel Plated Swivel Options
-
Nickel Plated Swivels: Available in four sizes: 4/0 (400 lb test), 6/0 (600 lb test), 9/0 (1000 lb test), and 12/0 (1500 lb test). Choosing the right strength rating ensures the swivel can handle the expected recovery loads without failure. Match the swivel test rating to your rocket's weight and expected descent forces.
Nickel Plated Swivels
-
Nickel Plated Swivels: Nickel-plated finish offers corrosion resistance for repeated use. Corrosion resistance means the swivel will remain smooth and functional through multiple launches, even if exposed to moisture or black powder residue.
-
Nickel Plated Swivels: Swivels allow rotation, minimizing line twist and tangling. This rotation is the core benefit: it prevents the parachute lines from twisting around the shock cord, which can cause the parachute to fail to open fully.
How to Install a Swivel
Attach the swivel to your parachute or shock cord using a knot or a quick-link. The swivel's eye is large enough for most common cord diameters. For high power rockets, a figure-eight or bowline knot works well. After attaching, give the swivel a gentle tug to confirm the connection is secure before packing the recovery system.
The catalog does not specify a preferred knot or attachment method, so use standard rocketry practices and inspect the connection before every flight.
Swivel Care Tips
- Inspect after each flight: Check for bent or cracked eyes, rough rotation, or any deformation. Replace the swivel if it shows signs of wear.
- Clean off residue: Black powder residue and dirt can gum up the swivel. Wipe it with a dry cloth or rinse with water and dry thoroughly before storage.
- Lubricate sparingly: A drop of light oil (like sewing machine oil) on the swivel joint can keep it spinning freely. Avoid heavy grease that can attract grit.
- Store dry: Keep swivels in a dry place to prevent moisture from causing corrosion over long storage periods. The nickel-plated finish helps, but no finish is invulnerable.
What the Catalog Doesn't Cover
The catalog does not provide specific instructions for knot selection, lubrication type, or maximum safe load calculations. Use your best judgment based on your rocket's weight and recovery system design. If your rocket exceeds the test rating of the largest swivel (1500 lb), consider using a stronger attachment method or multiple swivels in parallel.
