What the NiSi Allure Streak BLUE Filter Does
The NiSi Cinema 4×5.65" Allure Streak BLUE (2mm Streak) is a special effects filter that creates a single elongated blue streak from point light sources, strong highlights, reflective materials, or metallic surfaces. The effect mimics the look typically achieved with anamorphic lenses, giving your footage a cinematic anamorphic flare without needing an anamorphic lens setup.
The filter uses a single series of etched lines spaced 2mm apart across its surface. These lines produce a horizontal ray of blue light from each bright source in the frame. Because the effect is built into the glass, it works consistently across different lenses and scenes.
Setting Up the Filter in Your Matte Box
The NiSi Allure Streak BLUE is a 4x5.65" cinema filter, designed to fit standard matte boxes that accept 4x5.65" trays. Follow these steps for a clean setup.
- Choose a compatible focal length: NiSi recommends using focal lengths of 35mm and longer with their streak range. Shorter focal lengths can cause the streak to bend due to lens deformation, producing an uneven effect.
- Insert the filter into the matte box tray: Slide the 4x5.65" filter into an empty tray slot. Ensure the filter is seated flat and secure. The etched lines should be oriented horizontally by default to produce horizontal streaks.
- Rotate the filter to adjust streak direction: The filter can be rotated in the tray to change the orientation of the light streak. Rotating it tilts the streak angle, allowing you to align the streak with your composition or desired effect.
- Check the effect on a bright point source: Frame a point light source (e.g., a streetlamp, car headlight, or reflection) and review the streak. Adjust the rotation until the streak sits exactly where you want it in the frame.
Key Specifications at a Glance
-
NiSi Cinema 4×5.65″ Allure Streak BLUE (2mm Streak): The filter features a single series of etched lines spaced 2mm apart, producing a horizontal blue streak from point light sources. The 2mm spacing creates a defined, single streak rather than multiple streaks, giving you precise control over the anamorphic-style effect.
NiSi Cinema 4×5.65″ Allure Streak BLUE (2mm Streak)
-
NiSi Cinema 4×5.65″ Allure Streak BLUE (2mm Streak): Optical glass H-K9L construction maintains original image quality without affecting overall color or contrast. You get the streak effect without introducing unwanted color casts or reducing sharpness, preserving the integrity of your footage.
-
NiSi Cinema 4×5.65″ Allure Streak BLUE (2mm Streak): The filter can be rotated to adjust the orientation of the light streak. Rotating the filter lets you align the streak with your composition—horizontal, diagonal, or any angle you need for creative framing.
Focal Length and Lens Considerations
To keep the streak straight and consistent, stick to focal lengths of 35mm and longer. Wide-angle lenses below 35mm can introduce barrel distortion that bends the streak, making it look curved instead of a clean ray. This is a physical limitation of the etched line pattern, not a defect of the filter itself.
The filter works with any lens that accepts a 4x5.65" matte box tray, including cinema primes and zooms. Because the effect is generated by the filter glass, it does not depend on lens coatings or internal elements.
Practical Tips for On-Set Use
Test the streak angle before rolling. Rotate the filter while viewing the monitor to find the exact streak orientation that complements your scene. The filter can be adjusted between takes without removing the matte box.
The blue streak is most visible against dark backgrounds or when the light source is isolated. In bright scenes, the streak may blend in, so consider using the filter in low-light or night setups for maximum impact.
Keep the filter in a protective case when not in use. The optical glass surface is durable but should be handled with care to avoid scratches.
