Start with the contents, not the glue

Before you clip anything, lay out the parts and sort them by vehicle and gun. The Victrix set includes 4 Sd.Kfz.11 half-tracks and 4 Pak 40 anti-tank guns, plus two gun crews, stowage, ammunition boxes, spent shells, and sandbags. That gives you a full towed battery with prime movers, but it also means you need a plan for basing and assembly before you start.

The supplied information does not include step-by-step instructions or recommended glues, so use the parts as your guide and dry-fit before committing.

What the box confirms

  • Pak 40 + Sd.Kfz.11: The set includes 4 Sd.Kfz.11 half-tracks and 4 Pak 40 anti-tank guns. This tells you the set is designed as a towed battery, so you can plan four gun teams and four prime movers.

    Pak 40 + Sd.Kfz.11

    Pak 40 + Sd.Kfz.11

  • Pak 40 + Sd.Kfz.11: Two gun crews are included: one in standard uniform and one in smocks. You can vary crew figures across your guns for a less uniform look, or use one crew per two guns.

  • Pak 40 + Sd.Kfz.11: Crew for the back of the half-track, stowage, ammo boxes, spent shells, and sandbags are included. These parts let you model the gun in action or in transit, and add realistic detail to your bases.

A practical assembly order for the battery

Work in sub-assemblies so you can paint the guns and vehicles before adding fragile parts. The order below keeps the crew and stowage accessible until the end.

  1. Build the Pak 40 guns first: Assemble the four guns without the sandbags or crew. The 7.5/L46 barrel is the focal point, so keep it clean and straight.
  2. Assemble the Sd.Kfz.11 half-tracks: Build the four prime movers. Leave the rear compartment open if you plan to add crew or stowage later.
  3. Add stowage and ammo boxes: Place ammunition boxes and spent shells around the gun emplacement or on the half-track. Dry-fit to avoid blocking the crew positions.
  4. Position the crew: Use the two crews to animate the guns. One crew in standard uniform and one in smocks gives you variety across the battery.
  5. Add sandbags last: The included sandbags are ideal for securing the gun emplacement. Add them after the gun and crew are in place so they hug the base naturally.

Basing the gun and crew for 12mm games

For 12mm WWII, a common approach is to base each gun on a stand large enough to hold the gun, its crew, and some scatter terrain. The supplied sandbags, ammo boxes, and spent shells give you ready-made details for the base. Keep the base size consistent across your battery so the guns rank up visually and are easy to move.

If you plan to use the Sd.Kfz.11 as a towed option, you can either base the gun separately and leave the half-track unbased, or base both for a diorama-style piece. The set does not specify base sizes, so check your ruleset and match your existing collection.

Painting the Pak 40 and Sd.Kfz.11 together

Paint the guns and half-tracks in the same batch to keep your colors consistent. The Pak 40 entered service in 1942 and served to the end of the war, while the Sd.Kfz.11 was used from 1939 onward, so a mid-war German scheme suits both. Start with a dark yellow base, add camouflage as you prefer, then pick out the tires, tools, and stowage.

The crew figures offer a simple painting distinction: one set in standard uniform and one in smocks. Paint the smock crew in a different camouflage pattern or tone to tell them apart on the table. Keep the gun breech and ammunition boxes a slightly different shade to add depth.

What the supplied information does not confirm

The product record does not include assembly instructions, recommended base sizes, glue types, or paint codes. It also does not specify whether the Sd.Kfz.11 can tow the Pak 40 in game terms. Use the parts and your ruleset to make those decisions, and dry-fit before gluing.