What the PKAF Adapter Does

The Fotodiox Lens Mount Adapter for Pentax K AF Mount (PKAF) DSLR lenses to Sony Alpha E-Mount mirrorless cameras solves a simple problem: it lets you use your Pentax K glass on a modern Sony mirrorless body. Because the adapter is entirely manual, lens functions that rely on electronic communication with the camera body—autofocus, AE metering, image stabilization—will be disrupted. You set exposure manually or use your camera's Aperture Priority (stop-down) mode.

The key feature that makes this adapter practical is the integrated aperture control dial. Many Pentax K lenses lack a manual aperture ring, so without this dial the lens aperture would revert to its default position—either stopped down to its largest f-stop or opened up to its smallest f-stop, depending on the lens. The dial gives you back that control.

Adapter Features at a Glance

Supported Setup Sequence

The supplied evidence does not include a full step-by-step instruction manual, but the adapter's design and common mirrorless adapter workflow suggest the following supported approach.

  1. Prepare your camera body: Some Sony E-mount cameras need a menu setting to work with non-electronic lenses. If you see an 'Error Lens Not Attached - Check lens' message, set the camera to 'Shoot without lens' or enable 'Release shutter without lens' in the custom menu.
  2. Mount the adapter to the lens: Align the PKAF mount of the adapter with your Pentax K lens and twist to lock. The adapter has no electronic pins, so it's a purely mechanical connection.
  3. Mount the lens-adapter combo to the camera: Align the E-mount side of the adapter with your Sony body and rotate until it clicks into place. The release lever (circled in red on the adapter) is used to dismount later.
  4. Set the aperture with the control dial: Before or after mounting, rotate the aperture control dial to your desired f-stop. The dial physically moves the lens aperture mechanism, so you can shoot at any aperture the lens supports.
  5. Focus manually and meter: Use the lens's manual focus ring. Set exposure manually or use your camera's Aperture Priority (stop-down) mode, which meters with the lens stopped down to the selected aperture.

Important Compatibility Checks

This adapter is designed for Pentax K AF Mount (PKAF) DSLR lenses. It will not work with 'Focus-By-Wire' lenses (such as Canon's STM or Nikon's AF-P) because those lenses require power to engage the manual focus rings, and this adapter supplies no power.

If your Pentax K lens does have a manual aperture control ring, you can still use the adapter, but the integrated dial may not be needed—the lens ring will override the dial's position. The adapter's dial is most useful for lenses that lack a manual ring.

To determine the new crop factor or equivalent focal length when using the lens on your Sony camera, check the Fotodiox Knowledge Base article on that topic.

What the Supplied Information Does Not Cover

The supplied evidence does not include specific instructions for removing stubborn adapters, cleaning the contacts, or troubleshooting specific camera models beyond the generic 'Error Lens Not Attached' message. Fotodiox offers support articles on its Knowledge Base for a variety of camera brands, so check there if you encounter issues not described here.

The adapter's metal construction is durable, but the supplied evidence does not specify a maximum lens weight or torque limit. Use common sense: heavy telephoto lenses may need additional support (tripod collar, lens foot) to avoid stress on the adapter mount.