What the Kit Includes and How It Fits Together
The Perifo L-shaped ceiling base kit (2 spots, 1 light bar) is a smart track lighting system designed for kitchens where you need both focused task light and wider ambient light. The kit includes two cylinder spotlights, one linear light bar, two 39.4-inch rails, one 59.1-inch rail, a power supply unit (PSU) that sits at the end of one rail, and connectors to create an L shape that turns to the right.
Because the L shape is fixed to turn right, you'll want to plan your ceiling layout so that the longer 59.1-inch rail runs along the main work area and the shorter rails extend over an island or peninsula. The spotlights can be aimed at specific tasks like chopping or reading recipes, while the light bar provides even illumination across a broader surface.
Kit Contents at a Glance
-
Perifo L-shaped ceiling base kit (2 spots, 1 light bar): The kit includes two cylinder spotlights, a linear light bar, two 39.4-inch rails, a 59.1-inch rail, a PSU that sits at the end of one rail, and connectors to create an L shape that turns to the right. Knowing the exact components helps you confirm the kit matches your kitchen dimensions and layout before you start installation.
Perifo L-shaped ceiling base kit (2 spots, 1 light bar)
Planning Your Kitchen Layout with the L-Shaped Kit
Before mounting anything, map out your kitchen ceiling to decide where the L shape will sit. The L turns to the right, so orient the kit so the longer rail runs parallel to your main counter or island.
- Measure your work zones: Identify the areas where you need task lighting (sink, stove, prep area) and where you want ambient light (dining or island surface). The 59.1-inch rail can cover a long counter, while the 39.4-inch rails work well over a narrower island.
- Position the power supply: The PSU sits at the end of one rail. Choose a rail end that is near a ceiling junction box or an accessible power source. The PSU location will affect how the L shape is oriented, so plan this before finalizing rail placement.
- Aim the spotlights for task lighting: The two cylinder spotlights can be rotated and angled to highlight specific work areas. Place them over the sink or prep zone for direct light. The linear light bar provides a wider, softer spread, ideal over a dining table or central island.
- Check clearance and ceiling type: Ensure your ceiling can support the track system and that there are no obstructions like beams or vents. The kit is designed for ceiling mounting; verify that the supplied connectors and rails fit your ceiling dimensions.
Where the Light Bar and Spots Work Best
The linear light bar in this kit delivers a continuous line of light, which is excellent for illuminating a kitchen island or peninsula without harsh shadows. The two spotlights, on the other hand, give you the flexibility to direct light exactly where you need it—over the sink, stove, or a prep station.
Because the kit includes both types of fixtures, you can create separate lighting zones in one L-shaped run. This is especially useful in open-plan kitchens where the same track serves both cooking and dining areas.
Installation Considerations Before You Start
This kit requires connection to a mains power supply, but the supplied information does not include detailed wiring instructions. If you are not experienced with electrical work, hiring a qualified installer is recommended. The PSU must be positioned at the end of a rail, which may affect where you can place the kit relative to your existing junction box.
The L shape is pre-configured to turn right. If your kitchen layout would benefit from a left turn, you may need to flip the kit orientation or consider a different Perifo configuration. Always check that your ceiling structure can support the weight of the track and fixtures before mounting.
