Quick answer
If your G Pro X Superlight 2 feet are visibly worn, scratched, or dragging on cloth, PlastiX Xact Replacements are a low-cost, wear-resistant fix that restores glide. If the feet still look smooth and the pad is the culprit, clean or replace the pad first.
Why worn feet feel different on cloth versus hard pads
Cloth pads tend to mask small scratches and flat spots, so the first sign is often a slight tug or inconsistent glide rather than a loud scrape. Hard pads expose every imperfection, which is why a foot that feels fine on cloth can feel gritty on glass or hard plastic.
PlastiX Xact skates are engineered for cloth pads but also work on hard pads. That versatility matters if you switch surfaces, but it doesn't mean you should ignore a pad that has its own wear or contamination.
When a swap is not the right first move
If the mouse still glides evenly and the feet show no visible scuffs, the dragging is more likely from a dirty pad, a warped pad, or debris under the feet. Clean the pad and wipe the feet before buying replacements.
If the feet are lifting at the edges or the adhesive has failed, replacement is the correct fix; installing new skates over a lifted edge will not sit flat.
Diagnose your Superlight 2 feet
- Symptom: dragging or inconsistent glide: Run a fingertip across each foot. If you feel a flat spot, a rough patch, or a lifted edge, the feet are worn and PlastiX Xact replacements are the corrective action. If the feet feel smooth, check the pad for debris or wear before ordering skates.
- Symptom: scratchy sound on a hard pad but smooth on cloth: This usually points to a foot that has picked up grit or developed a small scratch. Clean the feet first; if the scratch remains, replace them with PlastiX Xact. A foot that only misbehaves on one surface is still a candidate for replacement if cleaning doesn't fix it.
- Symptom: the mouse sits unevenly or rocks: Check for a missing or compressed foot. If one foot is thinner than the others, replace the set rather than mixing old and new feet. Uneven thickness is a replacement trigger, not a pad problem.
- Stop rule: no visible wear and a clean pad: If the feet look uniform and the pad is clean, do not replace the skates yet. Re-test on a different pad to confirm the source of the problem. Replacing smooth feet won't fix a pad that is the real cause.
Product facts
-
PlastiX Xact Replacements - Logitech G Pro X Superlight 2: PlastiX Xact Replacement skates are made from a wear-resistant material and are engineered for cloth pads while also working on hard pads. They suit Superlight 2 owners who want a durable replacement that won't force a pad change, though pad condition still affects the final feel.
PlastiX Xact Replacements - Logitech G Pro X Superlight 2