Quick answer

Attach the fur trim by aligning its fastening points with the hood’s existing seam or tabs, securing it evenly from the centre outwards, then checking that the hood still folds and the trim stays clear of the child’s face. Always confirm your pushchair model is listed as compatible before fitting.

Why model-specific trims matter

A fur hood trim is not a one-size-fits-all accessory. Hood shapes, fastening methods and fabric thickness vary between brands, so a trim designed for a Phil & Teds hood may not sit correctly on a Red Kite or Bebe Confort pushchair. Using a trim that is not listed for your model can leave gaps, cause the trim to shift, or interfere with the hood’s folding mechanism. Always check the product description for compatibility before purchase.

When a universal trim might work—and when it won’t

Some generic trims rely on elastic or ties and can fit a range of hoods, but they often lack the precise shape of a model-specific trim. If your pushchair has a rigid hood with moulded channels or a particular tab layout, a universal trim may not secure neatly. Model-specific trims, like those for gb, Phil & Teds, Red Kite and Bebe Confort, are cut to follow the hood’s contour and use the intended attachment points, which reduces the risk of slipping or bunching.

Safety and care before you fit

Faux fur trims are typically made from synthetic materials, and some are fire-safety tested, but they still need to be fitted securely. Avoid attaching any trim with loose ties or clips that a child could reach. Remove the trim before washing the pushchair hood unless the trim’s care label says otherwise. Also check the trim regularly for wear or loose stitching, especially if it is removed and refitted often.

Step-by-step fitting instructions

  1. Check compatibility: Confirm your pushchair model is listed as compatible with the trim. For example, the Phil & Teds trim is designed for Phil & Teds pushchairs, and the Red Kite trim for Red Kite models. Do not force a trim onto a different brand. If your model is not listed, contact the retailer before fitting.
  2. Unfold and inspect the hood: Open the pushchair hood fully and locate the existing fastening points—these may be tabs, channels, or a seam along the front edge. Wipe the area clean and dry. A dirty or damp surface can prevent the trim from gripping properly.
  3. Align the trim with the hood’s edge: Starting at the centre of the hood, line up the trim’s fastening points with the hood’s tabs or channel. Work outwards to each side, checking that the trim follows the curve evenly. Do not stretch the trim; it should sit naturally without tension.
  4. Secure the fastenings: Attach the trim using the intended method—this may be clips, hook-and-loop tabs, or a sleeve. Press firmly along the length to ensure all fastenings are engaged. Tug gently on the trim to confirm it is secure before use.
  5. Test the hood’s fold: Fold and unfold the hood several times to check that the trim does not catch or prevent the hood from closing fully. Adjust the trim if it bunches or pulls. If the hood cannot fold flat, the trim is not fitted correctly.
  6. Final safety check: With your child in the pushchair, ensure the trim does not hang over the front edge or come into contact with your child’s face or neck. Check that no small parts are loose. Remove the trim if it obstructs your view of your child or the harness.

Product facts