The short answer: one intercooler, two EcoBoost stories

If you drive a 2015–2025 F-150 with the 2.7L EcoBoost, the PRL Motorsports intercooler is a direct-fit upgrade with no trimming or modifications required. If you have a 2015–2020 3.5L EcoBoost, it also fits—but the included cold-side coupler is specific to those earlier trucks. The 2021+ 3.5L is not listed in the supplied fitment, so this guide focuses on what the catalog actually confirms.

That year split is the main thing to check before you buy. Below, we break down the fitment by engine, what comes in the box, and the cooling evidence PRL provides so you can decide if this is the right charge air cooler upgrade for your truck.

Fitment by engine and year

The PRL intercooler covers three distinct groups. The 2.7L has the widest window, while the 3.5L and Raptor coverage stops at 2020.

  • 2.7L EcoBoost: Fits 2015–2025 Ford F-150 2.7L EcoBoost. This is the longest coverage in the catalog.
  • 3.5L EcoBoost: Fits 2015–2020 Ford F-150 3.5L EcoBoost. The 2021+ 3.5L is not confirmed in the supplied fitment.
  • Raptor: Fits 2017–2020 Ford F-150 Raptor. The Raptor uses the 3.5L EcoBoost, so it shares the 2020 cutoff.

What the direct-fit design actually retains

What's in the box—and the coupler that changes by year

Every PRL intercooler ships with the intercooler itself (in Silver or Black), an M6 x 1 x 12 JIS flange bolt, and a 1/8” NPT plug with sealant for the included drain plug. The cold-side silicone coupler is where the year matters: the 5-layer reinforced silicone coupler is specific to 2015–2020 trucks. If you own a 2021–2025 2.7L, the intercooler still fits, but the catalog does not confirm a coupler for that range—check with PRL before ordering if you need one.

The drain plug is worth noting if you see condensation in humid climates; it is included, not an add-on.

Cooling and power evidence from PRL's testing

Construction: bar-and-plate vs the factory tube-and-fin

The PRL core is a high-capacity bar-and-plate design with optimized fin density, paired with cast and machined aluminum end tanks that are TIG-welded for durability. PRL notes the heavy-duty construction offers improved impact resistance over the factory tube-and-fin intercooler, and each unit is powder-coated for corrosion resistance. Those are the physical reasons the intercooler can hold boost and temperature under load where the OEM unit struggles.

What the catalog does not confirm

  • 2021+ 3.5L EcoBoost fitment: The supplied fitment stops at 2020 for the 3.5L and Raptor. Do not assume the 2021+ trucks are covered without checking.
  • Cold-side coupler for 2021–2025 2.7L: The 5-layer reinforced silicone coupler is listed as 2015–2020 specific. The intercooler fits the later 2.7L, but the coupler for that range is not confirmed in the supplied information.
  • CARB status: The catalog describes a planned submission to SEMA Garage for CARB testing. That means CARB approval is not yet confirmed in the supplied information—relevant if you face emissions testing.

How to decide for your truck

For a 2015–2025 2.7L, the decision is straightforward: the PRL intercooler is a direct-fit, no-trim upgrade with documented gains and towing-focused cooling. For a 2015–2020 3.5L or Raptor, it is equally direct-fit and includes the correct coupler. If you own a 2021+ 3.5L, the catalog does not list your truck, so hold off until fitment is confirmed. And if you are chasing every last horsepower, the +50 hp / +40 lb-ft result with the PRL High Volume Intake System is the combination to plan for.