Start with the socket, not the wattage

The ProSun Cosmolux VHO F71 is a 160W bi-pin lamp. That single detail decides whether it belongs in your bed. Before you compare price or session time, confirm your existing lamps are bi-pin and rated for 160W. The product record explicitly asks buyers to check their lamp type before ordering, and the images show the bi-pin base. If your bed uses a different base or a lower-wattage circuit, these lamps are not a drop-in replacement.

This is a full-coat VHO lamp with a manufacturer part number of #16161. The record lists a life expectancy of 800 hours and a session time of 16–24 minutes. Those figures are supplied catalog details, not universal settings for every bed. Use them as a compatibility checkpoint against your bed's own labeling and instructions.

What the catalog confirms about this lamp

Where the 800-hour life and 90% maintenance figure fit your budget

The record states 90% maintenance at 100 hours and an 800-hour life expectancy. In plain terms, the lamp is designed to hold most of its output early in its life and then decline gradually. For a salon, that means the cost per lamp should be weighed against how many sessions you expect to run before replacement, not just the sticker price. The catalog price is USD 803.33, with a comparison price of USD 1199.00. Whether that is economical depends on your session volume and how strictly you track lamp hours.

The record also describes the lamp as economical for the amount of tanning power and notes it can maximize commercial tanning salon profits. Treat those as positioning statements from the catalog, not a guarantee of your return. If you run a home bed, the same lamp can be compatible, but the 800-hour life may last years at low use, which changes the value calculation.

Home bed vs commercial salon: same lamp, different buying logic

The record says the lamp is home and commercial compatible. The trade-offs differ by setting.

  • Commercial salon: High session volume makes the 800-hour life and 90% maintenance at 100 hours the main decision factors. Track hours per lamp and replace on schedule rather than waiting for visible decline.
  • Home bed: Lower volume stretches the 800-hour life over a long period. Confirm bi-pin fit and 160W rating first; the session time of 16–24 minutes in the record should be checked against your bed's own instructions.

Checks to complete before you order

  • Confirm the base: The Cosmolux VHO F71 is bi-pin. Compare the base in your bed with the product images; a different base will not fit.
  • Confirm the wattage: These are 160W lamps. Your bed's label or manual should state 160W compatibility. Do not substitute a different wattage without checking the bed's requirements.
  • Match the part number: The manufacturer part number is #16161. Use it to cross-check your bed's lamp specification.
  • Check your session guidance: The record lists 16–24 minutes. Your bed's own instructions remain the authority for session settings.
  • Plan lamp hours: With an 800-hour life expectancy, decide how you will log hours so replacement is based on use, not guesswork.

What the supplied record does not settle

The supplied information does not include a compatibility list by bed model, installation steps, or electrical requirements beyond the 160W bi-pin format. It also does not confirm whether this lamp suits every 160W bi-pin bed. Those gaps are decision limits, not evidence that the lamp lacks a feature. If your bed's manual specifies a particular lamp type beyond bi-pin and 160W, verify that specification before ordering. When the record is silent, the safe move is to check the bed's own documentation rather than assume fit from wattage alone.