Two ProSun ProTech II Lamp Boxes: What’s Different

If you're maintaining a tanning bed and need replacement lamps, the ProSun ProTech II line offers two similar-looking options: the Intensive R-UVA 110W 1.9m and the High Intensive R-UVA 120W XL. Both are sold in boxes of 12, both use Bi-Pin ends, and both are rated for 800–1,000 hours. But they are not interchangeable. The key differences are wattage, length, and the bed types they fit.

This comparison helps you pick the right box based on your equipment's requirements, without guessing.

Lamp Specifications at a Glance

110W vs 120W: Key Differences for Your Decision

The most obvious difference is wattage and length. The 110W lamps are 75″ long; the 120W XL lamps are 79″ long. Both have Bi-Pin ends, so the connector style is the same, but the physical size and power draw are not.

A 120W lamp draws more current and generates more UV output. It is designed for beds that specify XL (extra-long) lamps. Using a 120W lamp in a bed built for 110W could cause overheating or poor fit. Conversely, fitting a 110W lamp into an XL bed will leave a gap and reduce performance.

  • Wattage: 110W vs 120W. The High Intensive draws more power, so check your bed's ballast rating.
  • Length: 75″ (1.9m) for the Intensive, 79″ for the High Intensive XL. Measure your current lamp or check your bed's specs.
  • Lamp Life: Both are rated for 800–1,000 hours, according to the supplied information.
  • End Style: Both use Bi-Pin ends (two exposed metal pins). Connector compatibility is the same.

How to Confirm Which Box You Need

The supplied information lists both lamps as compatible with 'most standard tanning beds,' but that is a general statement. The safest approach is to check the lamp length and wattage printed on your current lamps or in your bed's manual. If your bed uses 75″ lamps, choose the 110W Intensive box. If it uses 79″ lamps, choose the 120W High Intensive XL box.

Both products are designed as OEM replacements for ProSun tanning beds, and both are described as easy to install and remove. The decision comes down to matching the physical size and electrical requirements of your unit.