Measure your shelf or desk before you order

The Quarter Arcades Carpet Mat is a display accessory, not a full-room rug. It measures 35.4in (90cm) long by 15.7in (40cm) wide, with a 0.2in (0.5cm) depth. That footprint suits a single cabinet with breathing room on either side, or a row of small items along a shelf.

Before buying, measure the surface where your Quarter Arcades replica will sit. If your desk is narrower than 15.7in in the usable depth, the mat will overhang. If you want the mat to cover a wider display area, plan to join multiple pads rather than stretching one.

What the mat is built to do

Setting up the mat on a desk or display shelf

Work from a clean, dry surface. The supplied information does not include cleaning or care instructions, so keep the mat away from spills where you can and avoid placing heavy, sharp objects on the cloth.

  1. Clear and dry the surface: Remove clutter and wipe the desk or shelf dry so the non-slip rubber base can grip.
  2. Lay the mat pattern-side up: The cloth surface faces up and the rubber base sits against the furniture. The repeating pattern has square edges, so align one edge with the desk edge or shelf front for a tidy look.
  3. Place the cabinet within the mat: Set your Quarter Arcades replica on the mat with its feet fully on the cloth. The mat is 35.4in long, so leave any remaining length as visual margin rather than letting the cabinet hang over the edge.
  4. Check for rocking: Press gently on each corner of the cabinet. If it rocks, check that the mat is flat and that no debris sits under the rubber base.

Joining two pads for a wider arcade row

The mat uses a repeating pattern with square edges, which allows multiple pads to be joined together. The supplied information does not specify a connector or adhesive, so treat joining as lining up edges rather than locking them.

  • Buy matching pads: Use the same Quarter Arcades Carpet Mat so the pattern repeats consistently across the seam.
  • Align the square edges: Butt the long edges together on a flat surface and check that the pattern lines up before placing cabinets near the seam.
  • Keep cabinets off the seam: Place each replica fully on one pad rather than straddling the join, so the cabinet sits on a continuous surface.

Using it as a mouse mat

The catalog lists the mat as usable as a mouse mat. At 35.4in by 15.7in it is far larger than a standard mouse pad, so it works best as a desk-wide surface under both keyboard and mouse rather than a small pad beside your keyboard. The smooth cloth surface and non-slip rubber base are the same features that make it a stable display base.

One honest tradeoff: the arcade carpet pattern is bold. If you want a neutral desk, this is not that mat. If you want your desk to echo an 80s or 90s arcade, the pattern is the point.

Surface and durability details

Where the mat fits and where it does not

This mat is a good fit if you own a Quarter Arcades replica and want a dedicated display base that matches the cabinet's scale, or if you want a large arcade-pattern desk surface that doubles as a mouse mat. It is a poor fit if your desk is shallower than 15.7in, if you need a small mouse pad, or if you want a subtle pattern.

The catalog does not list an age range, care instructions, or a machine-washable claim for this accessory, so do not assume those details. Keep the mat dry, avoid folding it sharply, and store it flat if you rotate your display.