Quick answer

Choose the composite double ball mount for simple, low-cost flat-surface installs, the Pin-Lock marine electronic mount when theft or vibration is a concern, and the Track Ball mount when you want to slide the fish finder along a track. Match the base to your boat first; the ball system is secondary.

Mounting surface decides more than the arm

All three mounts use RAM's 1-inch rubber ball and socket system, so articulation feels similar. The real difference is how each base attaches: a 2.5-inch round base with the universal AMPs hole pattern, a 6.25 x 2-inch rectangle plate with pre-drilled hole combinations, or a Track Ball base that slides into a track system such as RAM Tough-Track. Measure your dash, console, or gunwale before comparing arms.

A round base needs a flat area wide enough for its footprint and access behind the surface for fasteners. A rectangle plate spreads load across a larger area and offers more hole positions, but RAM notes that some devices may still need additional holes drilled. A track base only works if you already have a compatible track or plan to add one.

Security and vibration: when Pin-Lock earns its price

The Pin-Lock marine electronic mount adds a mixed-combination security nut and key knob to the double socket arm. That matters on open boats, at busy ramps, or on rough water where a standard tension knob can loosen or be quickly undone. The trade-off is extra handling every time you remove or reposition the unit, and a higher catalog price than the composite double ball mount.

If your fish finder stays on a sheltered boat and you mainly adjust it once per trip, the Pin-Lock hardware may be more security than you need. If you trailer frequently or leave electronics mounted between trips, the locking arm is the more practical choice.

Track systems: convenience with an installation prerequisite

The Track Ball marine electronic mount connects to any track system, including RAM Tough-Track, and pairs that base with a standard-length double socket arm and a 6.25 x 2-inch rectangle plate. The payoff is sliding the fish finder to a different position without unbolting anything, which suits center consoles and kayak layouts where space changes between fishing and running.

The catch is that the track itself is a separate installation. If you do not already have a track, factor in the cost and drilling for that before choosing this mount. On a small dash with no room for a track, a fixed round or rectangle base is simpler.

Decision rules for choosing your RAM fish finder mount

  • If you have a flat, accessible surface and a compatible device: Choose the composite double ball mount. Its 2.5-inch round base with AMPs pattern and included Humminbird/Eagle/Lowrance base covers many common fish finders at the lowest catalog price of the three. Check that your device matches the included connecting base before ordering.
  • If theft, trailering, or heavy vibration is a concern: Choose the Pin-Lock marine electronic mount. The security nut and key knob lock the arm, and the 6.25 x 2-inch rectangle plate offers multiple hole positions for a wide range of electronics. Budget for the higher price and accept slower removal when you want the locking arm.
  • If you already have a track or plan to add one: Choose the Track Ball marine electronic mount. It slides along RAM Tough-Track or any compatible track, and the rectangle plate supports a wide range of fish finders and chartplotters. Confirm track compatibility and installation space before buying; the track is not included.
  • If your device is not listed and the plate holes do not line up: Treat drilling as a possible step. RAM states that additional holes may need to be drilled on the rectangle plate for proper fit in certain applications; the round base relies on its AMPs pattern instead. Dry-fit the plate to your device before drilling.

Product facts

Who each mount suits

Best for

  • Anglers with a flat dash or console and a Humminbird, Eagle, or Lowrance unit that matches the included base
  • Boaters who want a low-cost, simple fixed mount with tool-free angle adjustment
  • Owners of track-equipped boats or kayaks who want to slide electronics between positions

Not for

  • Boaters who need a locking arm and leave electronics mounted unattended
  • Installations without a flat surface or behind-panel access for fasteners
  • Boats with no compatible track and no room to add one