Before chasing a handling problem, confirm you are looking at the right component. The RER41351 is a front upper link set for the Vertex 6, sold as one pair at 157mm. If your vehicle is not a Vertex 6, this part is not listed for it, and any troubleshooting should start with the correct part number for your model.

That matters because a worn link can feel like a dozen other issues: vague steering, a wandering front end, or a link that will not hold its position. The RER41351 listing gives you the length, the quantity, and the compatible vehicle. It does not include a wear interval, torque spec, or installation procedure, so the checks below focus on what you can observe and confirm yourself.

What the RER41351 listing confirms

  • RER41351: Front upper links, 157mm, one pair Length and quantity tell you whether this is the pair you need before you diagnose anything else.

    RER41351

    RER41351

  • RER41351: Listed for use with the Vertex 6 Fitment is model-specific; confirming the vehicle avoids ordering a link that will not work.

  • RER41351: Replacement spare part, front upper links only The listing covers the links alone, so check whether your existing hardware is reusable before ordering.

These are observation points, not a manufacturer inspection schedule. Use them to decide whether the links deserve a closer look.

  • Visible play at the link ends: With the vehicle stationary, gently check for movement that should not be there. Any looseness at the mounting points is a reason to inspect further, though the catalog does not specify a wear limit.
  • Cracks, bends, or deformation: Compare the two links side by side. A bent or cracked link is a clear replacement candidate; the 157mm length gives you a reference for checking that a link has not been deformed.
  • Loose or missing mounting hardware: The listing covers the links only. If screws or pins are loose or missing, address that separately rather than assuming a new pair of links solves it.
  • Steering that will not hold a setting: If the front end wanders or a link slips out of position repeatedly, inspect the links and their mounting points before replacing other parts.

A practical order of checks before you buy

  1. Confirm the vehicle is a Vertex 6: The RER41351 is listed for the Vertex 6 only. If you are unsure of your model, identify it first.
  2. Confirm the part number on your current links: Match what is on the vehicle to RER41351 so you are comparing like for like.
  3. Inspect both links, not just the suspect one: They are sold as a pair, so check the opposite side for the same wear signs.
  4. Check the rest of the front end: Look at mounting points and hardware for damage or looseness that a new pair of links would not fix.
  5. Order the pair if the links themselves are worn or damaged: The listing is for the front upper links only, so plan for any hardware you find damaged during inspection.

When a replacement pair is the sensible fix

If inspection shows bent, cracked, or visibly worn links on a Vertex 6, replacing the pair is the straightforward path. The RER41351 is sold as one pair at 157mm, which matches the front upper link position on that vehicle.

If the links look sound and the problem is loose hardware or another component, a new pair of links will not address it. The catalog does not provide a wear limit or service interval, so the decision rests on what you can see and feel during inspection rather than on a mileage or hours threshold.

What the listing does not tell you

The supplied information does not include installation steps, torque values, or a maintenance schedule for the RER41351. It also does not confirm whether the original mounting hardware is included or reusable. Treat those as checks to make against your own vehicle and its documentation rather than assumptions.

What the listing does confirm is narrow and useful: front upper links, 157mm, one pair, for the Vertex 6. Confirm the part number and your vehicle before ordering, and let the condition of the links, not guesswork, drive the replacement decision.