When Your Gravity Waterer Needs a New Cap
The cap (or plunger cap) on a gravity waterer is the part that seals the bottle and controls water flow. Over time, it can crack, warp, or lose its seal, causing leaks or slow water release. If you own a large Petmate Pet Cafe Waterer, Aspen Pet Deluxe Waterer, or Aspen Pet Gravity Waterer (2.5–3 gallon size), you can order a direct replacement cap rather than buying a whole new waterer.
Replacement Cap Compatibility
-
Replacement Cap (Lid) for Pet Cafe and Aspen Pet® Large Gravity Waterers: This replacement plunger cap works with the large (2.5–3 gallon) Petmate Pet Cafe Waterer, Aspen Pet Deluxe Waterer, and the Aspen Pet Gravity Waterer. Ensures you buy the correct cap for your specific waterer model and size.
Replacement Cap (Lid) for Pet Cafe and Aspen Pet® Large Gravity Waterers
-
Replacement Cap (Lid) for Pet Cafe and Aspen Pet® Large Gravity Waterers: Confirm which size waterer you have prior to ordering to ensure you receive the correct replacement cap. A wrong cap won't fit or seal properly, leading to continued leaks or no water flow.
How to Replace the Gravity Waterer Cap
Replacing the cap is straightforward. The catalog does not provide full step-by-step instructions, but the general process is:
- 1. Remove the old cap: Twist off the old plunger cap from the bottle. If it's stuck, run warm water over the threads to loosen it.
- 2. Clean the bottle threads: Wipe the bottle opening to remove debris or mineral deposits that could prevent a tight seal.
- 3. Install the new cap: Screw the replacement cap onto the bottle until snug. Do not overtighten, as this can crack the plastic.
- 4. Test for leaks: Fill the bottle, attach it to the base, and check for dripping. If it leaks, tighten slightly or inspect the gasket.
When Your Fresh Flow Fountain Needs a New Pump
Pet fountains rely on a pump to circulate water. If your Petmate Deluxe Fresh Flow fountain stops pumping, runs noisily, or has weak flow, the pump may be failing. The Petmate Deluxe Fresh Flow Replacement Pump is designed for this exact repair.
Fresh Flow Replacement Pump Details
-
Petmate Deluxe Fresh Flow Replacement Pump: The Petmate Fresh Flow Replacement pump fits all Regular and Deluxe Fresh Flow models. Compatible with multiple fountain versions, making it a versatile spare part.
Petmate Deluxe Fresh Flow Replacement Pump
-
Petmate Deluxe Fresh Flow Replacement Pump: Includes pump, AC adapter, and cord. Does not include the Flow Lever or On/Off switch. You keep the original lever and switch; only the pump unit needs replacement.
-
Petmate Deluxe Fresh Flow Replacement Pump: Not compatible with Petmate's Fresh Flow II pet fountains. Check your fountain model before ordering to avoid incompatibility.
-
Petmate Deluxe Fresh Flow Replacement Pump: UL listed and meets U.S. requirements only. If you're outside the U.S., verify electrical compatibility.
How to Replace the Fresh Flow Pump
The replacement process is simple, based on the supplied instructions:
- 1. Remove the filter reservoir: Pull straight up to detach it from the fountain base.
- 2. Remove the old pump: Unplug the old pump and lift it out. Note the cord routing for reinstallation.
- 3. Install the new pump: Press the new pump unit firmly into the area marked 'pump' in the fountain base.
- 4. Reattach the filter reservoir: Press it back into place until it clicks or sits securely.
- 5. Test the fountain: Fill with water, plug in, and check for normal flow. If the pump doesn't run, check the power connection.
Which Replacement Part Do You Need?
If your gravity waterer leaks or the cap is damaged, order the Replacement Cap for Pet Cafe and Aspen Pet large waterers. If your Fresh Flow fountain stops circulating water, order the Deluxe Fresh Flow Replacement Pump. Both are affordable, easy to install, and extend the life of your pet's watering system.
Always confirm your model and size before ordering, especially for the cap, which is specific to the 2.5–3 gallon size. The pump fits multiple Fresh Flow models but not the Fresh Flow II.