What the RER15739 Pin Set Is

The RER15739 is a Redcat Racing spare part consisting of 12 pins, each measuring 1x22mm. It is listed for use with the BED DANCER vehicle and is categorized as a spare part. These pins are small but essential components that connect or secure parts of your RC's drivetrain or suspension. Over time, they can show signs of wear that affect performance.

RER15739 Catalog Facts

  • RER15739: This Redcat Racing spare part is a 1x22mm pin set supplied as 12 pieces. Pin size: 1x22mm. Quantity: 12 pieces. Knowing the exact size and quantity helps you confirm compatibility and plan replacements before you run out.

    RER15739

    RER15739

  • RER15739: It is listed for use with the BED DANCER vehicle and is categorized as a spare part. This confirms the intended application, so you can check if your vehicle matches before ordering.

Common Wear Signs

Because the RER15739 pins are small and subject to friction, they can wear in a few predictable ways. Look for these signs during routine maintenance:

1. Visible bending or distortion – Pins that are bent may cause binding or misalignment in the linkage they secure.

2. Surface scoring or grooving – Deep scratches or grooves indicate metal-on-metal wear, which can lead to premature failure.

3. Loose fit in the bore – If a pin slides too easily or has excessive play, it may have worn down in diameter.

The supplied information does not include specific wear intervals or torque values. Inspect the pins visually each time you clean your BED DANCER, and replace any that show the above signs.

How to Fix or Prevent Issues

Replacement is the primary fix for worn RER15739 pins. Since the set comes with 12 pieces, you have spares on hand for multiple repairs. Keep a few new pins in your toolkit so you can swap them out during a trail-side fix.

Prevention is mostly about keeping the pins clean and lightly lubricated. Dirt and grit accelerate wear, so a quick wipe and a drop of light oil after each run can extend pin life. The catalog does not specify a lubricant type, so use a general-purpose RC oil suitable for metal-to-metal contact.

If you notice repeated bending or breakage, check the surrounding components for misalignment or binding. The pins themselves are a symptom, not the root cause.