Quick Answer
Most RER41735 frame rail issues stem from incorrect installation, over-tightening, or impact damage. Follow the diagnosis steps below to identify the root cause and apply the correct fix.
Why Frame Rails Matter
The RER41735 frame rails are structural components on the Ascent 32 and Ascent 32 V2. They support the chassis and absorb trail stress. When they fail, the vehicle's handling and durability suffer.
Diagnosis Steps
- Symptom: Frame rail appears bent or cracked: Inspect the rail visually. If bent but not cracked, you may be able to gently straighten it using pliers with padded jaws. If cracked, replace the rail immediately. Do not run a cracked rail; it can snap and damage other components.
- Symptom: Frame rail won't align with chassis holes: Likely cause: over-tightened screws or a slightly bent rail. Loosen all chassis screws, align the rail, then tighten in a crisscross pattern to 6-8 in-lbs. If the rail is still misaligned, it may be warped and should be replaced. Use a torque driver to avoid over-tightening in the future.
- Symptom: Frame rail breaks during normal driving: Check for impact damage or stress concentration. If the break is near a mounting hole, the screws may have been too tight. Replace the rail and consider adding a thin rubber washer under each screw head to distribute load. If breakage recurs, inspect the chassis for cracks or warping that could be transferring extra stress.
- Symptom: Frame rail is missing or lost during disassembly: Order a replacement RER41735 set. Keep spare screws and washers handy. When reinstalling, follow the torque guidelines above. Store spare parts in a labeled container to avoid loss.
Product Facts
-
RER41735: Redcat Racing RER41735 Frame Rails are a spare part set for Ascent 32 and Ascent 32 V2 vehicles. Knowing the exact vehicle compatibility helps you avoid ordering the wrong part for your RC.
RER41735
