Quick Answer
To install a retractable hose reel, mount it securely on a wall at a convenient height, connect it to your water supply, and then pull out the hose gently for use. Follow the steps below for a safe and efficient setup.
Why Wall Mounting Matters
Mounting your retractable hose reel on a wall keeps it out of the way, protects it from damage, and makes it easy to access. Choose a spot close to your outdoor tap and away from high-traffic areas to prevent tripping hazards.
Ensure the wall surface is solid—brick, concrete, or timber studs work best. If you're unsure about the mounting surface, consult a professional or use appropriate anchors for your wall type.
Choosing the Right Height
Install the reel at a height that allows you to pull the hose out without bending or stretching. A common recommendation is to mount it at chest height, but adjust based on your own reach and the layout of your garden.
Consider the hose's reach: a 30m reel gives you plenty of coverage for most yards, but measure the distance from the tap to the furthest watering point to ensure it's sufficient.
Step-by-Step Installation and Use
- Choose the Mounting Spot: Select a wall near your outdoor tap, ensuring there's enough clearance for the hose to extend fully. Mark the mounting holes using the reel's bracket as a template. Double-check that the hose can reach all your watering areas before drilling.
- Secure the Bracket: Drill pilot holes and attach the bracket with suitable screws and wall anchors. Make sure it's level and firmly fixed to the wall. Give the bracket a firm tug to test its hold before hanging the reel.
- Mount the Reel: Lift the hose reel onto the bracket, ensuring it locks into place. Confirm it rotates smoothly and doesn't wobble. If the reel wobbles, tighten the mounting screws or add additional anchors.
- Connect the Water Supply: Attach your garden hose or the reel's inlet to the outdoor tap. Use the included leak-free connectors for a secure, drip-free connection. Turn on the water and check for leaks at all connection points.
- Pull Out and Use the Hose: Gently pull the hose out to the desired length. Avoid yanking or over-extending, as this can strain the retraction mechanism. Keep the hose straight while pulling to prevent kinks.
- Retract the Hose Properly: Guide the hose back as it retracts, holding it slightly taut to prevent tangles. Let it lock into place when fully retracted. Never let go of the hose while it's retracting—always control it with your hand.
Product Spotlight
-
Classic 30m Retractable Hose Reel | Charcoal: The Classic 30m Retractable Hose Reel in Charcoal features a sleek charcoal casing designed for modern outdoor settings and comes bundled with Hoselink's leak-free connectors. This means you get a durable, stylish reel that's ready to connect to your tap without extra fittings, saving time during installation.
Classic 30m Retractable Hose Reel | Charcoal