What This Guide Covers

This guide walks you through building the RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144 kit. You will learn about the kit's unique features, assembly steps, decal application, and posing options. The supplied information confirms the kit's gimmicks and included parts, but does not include step-by-step instructions—this guide fills that gap with practical advice based on what is known.

Kit Contents and Key Features

  • RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144: The kit includes weapons: Triceros-Kai, Tsumuhanotachi, and Okitsu No Kagami, plus a Rondo Mina pilot figure. Knowing all included parts helps you organize your build and check for missing runners before starting.

    RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144

    RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144

  • RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144: The spear-shaped weapon Okitsu no Kagami uses solid and clear parts for the first time in 1/144 scale. Clear parts require careful handling to avoid scratches; use a clean surface and sharp nippers for sprue removal.

  • RG #024 Gundam Astray Gold Frame Amatsu Mina 1/144: The rear-mounted Maga no Ikutachi incorporates deployment, extension, and retraction gimmicks. These moving parts add complexity to assembly—follow the order of sub-assemblies to avoid fit issues later.

Assembly Sequence and Tips

Start with the inner frame (MSJoint), as it provides the base for armor and gimmicks. The kit uses PS, PP, ABS, and PVC materials, so use a plastic-safe cement or snap-fit as intended.

  1. 1. Build the MSJoint inner frame first: The kit uses a pre-assembled MSJoint for the arms and legs. Attach armor parts carefully to avoid stressing the joint, which can loosen over time.
  2. 2. Assemble the arms with extension/retraction mechanism: The arms have a unique RG mechanism that allows extension and retraction. Test the range of motion before attaching the outer armor.
  3. 3. Build the Maga no Ikutachi rear unit: This component has deployment, extension, and retraction gimmicks. Assemble it in the order indicated by the runner numbers to ensure smooth movement.
  4. 4. Construct the Okitsu no Kagami spear: Combine the solid and clear parts. Use a glass file or fine sandpaper to clean nubs on clear parts to maintain transparency.
  5. 5. Apply sticker-style decals after assembly: The kit includes sticker-style decals. Apply them after the main assembly using tweezers for precision. A cotton swab can help press them flat.

Decal and Detail Application

The RG Amatsu Mina comes with sticker-style decals that add panel lines and color accents. Apply them after the main assembly to avoid smudging during handling. Use a hobby knife to cut decals close to the design, and press firmly with a soft cloth or cotton swab. The kit's colored plastic and different materials recreate texture differences, so decals are optional for a clean look.

Posing and Display Considerations

The RG Amatsu Mina has articulated joints but uses the MSJoint system, which can loosen over time. For dynamic poses, consider using an Action Base (not included) to support the weight. The arms can extend and retract, allowing for weapon-wielding poses with Triceros-Kai and Tsumuhanotachi. The Okitsu no Kagami spear can be held in either hand. Be gentle with the rear Maga no Ikutachi gimmicks to avoid stress on the connectors.

What the Supplied Information Does Not Cover

The supplied records confirm the kit's materials, gimmicks, and included accessories, but do not include official step-by-step assembly instructions. The kit has very small pieces at a 1/144 scale, so patience and good lighting are recommended. No paint or glue is required, but panel lining can enhance the look—use a fine-tip marker or wash, and test on a hidden area first.