Quick answer

Display the RiCO 150% Love Milk on a stable, shaded shelf at eye level, dust it every two to four weeks with a soft brush, and keep it away from direct sun and heat. That routine protects the PVC finish and keeps the 4-inch figure looking crisp.

Why a 150% figure needs a different spot than a blind-box mini

At roughly 4 inches tall, the RiCO 150% Love Milk sits between a standard blind-box figure and a larger centerpiece. That extra height and weight make it more stable on a flat shelf but also more likely to tip if you perch it on a narrow ledge or stack it on top of smaller toys.

The milk-themed design also has broad, light-colored surfaces where dust and fingerprints show quickly. A spot with some airflow and no direct sun keeps those surfaces cleaner and reduces the need for frequent wiping.

Where not to put it, even if it looks good

Avoid windowsills, radiators, and the tops of speakers or monitors. Sunlight can fade PVC over time, and heat sources can soften or warp the material. A high-traffic shelf near a doorway is also risky because a sleeve or bag can knock the figure over.

If you want the figure near your desk, place it at least a hand-width back from the edge and use a small museum putty pad under the base if the surface is glossy. The putty is removable and adds grip without marking the shelf.

Your step-by-step display and care routine

  1. Choose a stable, shaded shelf: Pick a flat shelf at or slightly below eye level, away from windows, radiators, and room traffic. Check that the shelf can hold the figure without wobbling when you press gently on the corner. If the shelf flexes or tilts, move to a sturdier surface before placing the figure.
  2. Place the figure with clearance: Set the RiCO 150% Love Milk at least 2 inches from the shelf edge and 1 inch from neighboring toys so nothing leans on it. If the surface is glossy, add a small removable putty pad under the base. Test the placement by nudging the shelf lightly; the figure should not slide or rock.
  3. Dust with a soft brush every two to four weeks: Use a clean, dry makeup brush or soft paintbrush to sweep dust from the top of the head down to the base. Work over a bin or paper towel so dust does not settle on other collectibles. If dust has built up in crevices, switch to a dry microfiber cloth wrapped around a cotton swab rather than pressing harder with the brush.
  4. Wipe fingerprints with a barely damp cloth: Dampen a microfiber cloth with water and wring it out until no drips fall. Wipe the smooth PVC surfaces gently, then dry immediately with a second dry cloth. Never use alcohol, acetone, or household cleaners; they can cloud or strip the finish.
  5. Rotate and inspect quarterly: Every three months, turn the figure a quarter turn and check the base, back, and underside for dust, stickiness, or color change. Note any leaning or looseness before it becomes a fall. If you see a sticky residue or fading, move the figure to a darker, cooler spot and clean with water only.

Product facts

  • RiCO 150% Love Milk: RiCO 150% Love Milk is a limited designer toy from F.un, limited to 1001 pieces worldwide and made from durable PVC. The limited run makes replacement hard, so a stable, shaded display spot protects both the finish and the collectible's long-term condition.

    RiCO 150% Love Milk

    RiCO 150% Love Milk