Start with the beam path, not the prism
A right angle prism is an optical element with flat, polished surfaces that deflect or deviate a beam of light. In practice, you choose one by sketching the path first: where the beam enters, where it must leave, and how much space the mount and prism occupy along that route. The prism is the component that makes the turn, but the layout decides which face should receive the beam.
Esco manufactures right angle prisms as part of a standard line of elementary shaped optics, alongside equilateral prisms and laser prisms. The catalog record describes prisms generally as flat, polished elements for beam deviation, so the useful buying questions are about orientation, size, quality grade, and substrate—not about a single fixed use.
How a right angle prism steers a beam
A right angle prism turns a beam by reflecting it internally. The beam enters one leg face, strikes the hypotenuse, and exits through the other leg face. Because the two leg faces meet at a right angle, the exit path is turned relative to the input path. That geometry is what makes a right angle prism useful for compact beam routing, periscope-style layouts, and any setup where the source and the target sit on perpendicular axes.
The supplied product record does not list a specific deviation angle, transmission curve, or wavelength range for each variant. Treat the turn as a layout decision you confirm with your own optical design, and use the catalog facts below for the attributes Esco does publish.
Total internal reflection: when the hypotenuse does the work
In a right angle prism, the hypotenuse can act as an internal reflecting surface when light strikes it beyond the critical angle for the glass-air interface. That is the basis of total internal reflection in this geometry. The practical consequence is that an uncoated prism can redirect a beam without a mirrored hypotenuse, provided the incoming beam and the surrounding medium satisfy the reflection condition.
The catalog record states that unless otherwise specified, all prisms are supplied uncoated, and that coatings can greatly enhance a prism's performance. If your application depends on a particular reflection behavior, confirm the coating and the interface conditions with Esco rather than assuming an uncoated part will behave identically in every mount or environment.
Orientation: the step that decides whether the layout works
Right angle prism orientation is not a cosmetic detail. The beam must enter the correct leg face so that the hypotenuse reflects it toward the exit face. Rotating the prism about the beam axis changes which way the exit beam travels, and flipping it can send the beam in an unintended direction. Before you order, mark the input and output directions on your layout and check that the prism's leg faces align with them.
The supplied record does not include a mounting drawing, an index orientation, or a recommended rotation procedure. Use your own optomechanical layout to define the orientation, and ask Esco for the mechanical details you need if the mount interface is critical.
What the Right Angle Prism record confirms
-
Right Angle Prism: Right Angle Prism, catalog price USD 71.94 (comparison price USD 119.90). Gives you a current catalog reference point before you compare sizes and grades.
Right Angle Prism
-
Right Angle Prism: Available options include leg length, quality, and material. These are the three decisions that shape fit, optical performance, and substrate choice.
-
Right Angle Prism: Standard material is N-BK7 optical glass or equivalent; indicate in order notes if N-BK7 is required. If your design calls for N-BK7 specifically, the order note is how you make that requirement explicit.
-
Right Angle Prism: Unless otherwise specified, all prisms are supplied uncoated; coatings can greatly enhance a prism's performance. Coating is a deliberate choice, not a default, so plan for it if your application needs it.
Choosing leg length, quality, and material
The catalog lists leg lengths of 5, 10, 15, 20, 25, and 38.1 in the supplied variant evidence, with quality grades Commercial and Laser and materials N-BK7 and S1-UV. Not every combination appears in the supplied list, so confirm the exact variant before ordering.
- Leg length: Leg length sets the physical size of the prism and therefore the clear aperture and mounting footprint. The supplied variants range from 5 to 38.1. Match the leg length to the beam size and the mount you already have, not to a rule of thumb.
- Quality grade: Commercial and Laser grades are both listed. The supplied record does not give a surface specification for each grade, so treat grade as a starting point and confirm the surface quality you need with Esco.
- Material: N-BK7 and S1-UV appear in the supplied variants. The record states N-BK7 or equivalent is standard and that you should note N-BK7 in order notes if it is required. S1-UV is listed as an option, but the supplied evidence does not give its transmission range, so confirm suitability for your wavelength before selecting it.
Periscopes and other beam-routing layouts
A right angle prism for periscopes is a common use: two prisms can fold a line of sight or a beam through a compact path. The same geometry supports other routing tasks where the source and target are not collinear. The catalog record does not describe a specific periscope assembly, so treat the prism as one element in a layout you design and verify.
If your application needs a surface quality better than commercially available optics, Esco states it can manufacture to that requirement, including surface quality better than laser grade, 10-5, or λ/20. That is a custom path, not a standard variant, so raise it early if your layout demands it.
A practical selection sequence
- Draw the beam path: Mark input and output directions and the space available for the prism and mount.
- Fix the orientation: Decide which leg face receives the beam and which face exits, then check that the hypotenuse reflects toward the exit.
- Pick leg length: Choose from the supplied lengths so the prism fits the mount and covers the beam you intend to steer.
- Choose quality and material: Select Commercial or Laser grade and N-BK7 or S1-UV, and note N-BK7 in the order notes if it is required.
- Decide on coating: Uncoated is the default. If your application needs a coating, request it explicitly.
Where the standard catalog stops
The supplied record does not include a deviation tolerance, a transmission specification, a damage threshold, or a mounting drawing for each variant. It also does not confirm that every leg length, quality, and material combination is stocked. If your design depends on any of those values, ask Esco before you order rather than inferring them from the catalog summary.
Esco also designs and manufactures custom prism optics, and the record states there are hardly any size limitations for the prisms it can build. That makes a custom quote a reasonable route when a standard variant does not fit your layout, but the custom path should be planned with Esco's engineering input rather than assumed from the standard listing.
