Quick answer

If your scooter is a Maxi Pro, the Right Shank for Maxi Pro (product 1326417) is the correct replacement and is priced at $3.59. If you own a Maxi Original, that shank is not the right part; the Maxi Original uses a different deck and frame assembly, and the most common repair is a new deck (product 1326520) at $17.24. Match the part to the model name printed on your scooter before ordering, because the shank and the deck are not interchangeable between the two.

What the Right Shank for Maxi Pro actually replaces

The Right Shank for Maxi Pro is a single standard SKU replacement part from Micro Kickboard, intended for the Maxi Pro. It is listed under Scooter Parts and is sold as one piece, not a pair. That matters because shanks are side-specific: a right shank and a left shank are different parts, and ordering the wrong side leaves you with a scooter that still will not ride correctly. If you are replacing a damaged shank, inspect both sides before ordering so you know which one failed.

Because the catalog does not list a left shank for the Maxi Pro, treat the right shank as a targeted repair for the right side only. If the damage is on the left, contact Micro Kickboard support to confirm what is available rather than assuming the right shank can be flipped or adapted.

Why the Maxi Original takes a different repair path

The Maxi Original and Maxi Pro are separate models with separate part lines. The Maxi Original's listed replacement is the Deck for Maxi Original, a colored deck that snaps onto the black frame. The catalog describes it as making the whole scooter look new, especially when paired with matching handlebar covers sold separately. Installation uses a Phillips-head screwdriver to remove eight black screws on the underside, then the old deck lifts off starting at the rear end. The new deck snaps on rear-end first.

That is a different kind of repair from a shank swap. On the Maxi Original, the deck is the wear and appearance item most owners replace. On the Maxi Pro, the right shank is a smaller structural part. Buying a Maxi Original deck will not fix a Maxi Pro shank problem, and a Maxi Pro right shank will not fit a Maxi Original.

How to confirm which model you have before ordering

Check the model name on the scooter itself or on the original packaging or receipt. Micro Kickboard names its models clearly, and the part listings follow those names. If you cannot find a model name, measure and photograph the broken area and send it to Micro Kickboard support before ordering, because the catalog does not supply shank dimensions or a full compatibility chart.

One more fit check: the 19mm Headstock Bolt & Screw for 2-Wheeled Scooters is listed as compatible with Micro Sprite, Flex, Rocket, Monster, and Micro Classic. It is not listed for the Maxi Pro or Maxi Original, so do not assume it is the fastener you need for a Maxi shank or deck job. Use the hardware that matches your specific model.

Trade-offs: shank repair vs deck replacement

  • Cost and scope: The Right Shank for Maxi Pro is $3.59 and fixes one specific right-side part. The Deck for Maxi Original is $17.24 and replaces the entire colored deck. Spend less if one small part failed; spend more if the deck is worn, cracked, or faded.
  • Install effort: A shank swap is a small-part job. A deck swap needs a Phillips-head screwdriver, removal of eight underside screws, and careful rear-first lifting and snapping. Choose the deck only if you are comfortable with a full deck removal.
  • Model lock-in: The right shank is intended for the Maxi Pro. The deck is intended for the Maxi Original. Neither is listed as cross-compatible. Confirm your model name first; the wrong part will not fit either way.

Parts in this comparison

  • Parts: Right Shank for Maxi Pro: Right Shank for Maxi Pro is a replacement scooter part from Micro Kickboard, intended for the Maxi Pro, listed under Scooter Parts as a single standard SKU (code 4772). It is a model-specific, single-side part, so it only solves a right-side shank problem on a Maxi Pro.
  • Parts: Deck for Maxi Original: Deck for Maxi Original is a colored deck that snaps onto the black frame; installation requires removing eight black screws with a Phillips-head screwdriver and lifting the old deck from the rear first. This is the Maxi Original repair path, and the color option lets you refresh the scooter's look at the same time.
  • Parts: 19mm Headstock Bolt & Screw for 2-Wheeled Scooters: 19mm Headstock Bolt & Screw is compatible with Micro Sprite, Flex, Rocket, Monster, and Micro Classic. It is not listed for Maxi models, so it is not a substitute for Maxi shank or deck hardware.

Which part should you order?

Best for

  • Maxi Pro owners with a damaged or worn right-side shank
  • Riders who want a low-cost, single-part repair
  • Owners who have already confirmed the model name on the scooter

Not for

  • Maxi Original owners, who should look at the Deck for Maxi Original instead
  • Anyone needing a left shank, since only the right shank is listed
  • Owners who have not confirmed whether their scooter is a Maxi Pro