What this mount is made for
The Brainwavz Wall Mount for Ring Indoor Plus Camera is designed specifically for that one model. It is not compatible with other Ring Indoor cameras. The mount lets you attach your camera to a wall or vertical surface, improving the viewing angle and keeping the camera secure.
Mounting options: adhesive or screws
You have two ways to attach the mount. The adhesive option uses 3M VHB tape and requires no tools. The screw option uses included hardware: screws, washers, wall plugs, and screw caps. Choose based on your surface and whether you want a permanent or removable installation.
Adhesive mount setup
The adhesive method is quick and tool-free, but surface choice matters.
- Check surface suitability: Do not place the adhesive mount on painted, damp, or plastered walls. These surfaces are not suitable for adhesive mounting. Clean, dry, smooth surfaces work best.
- Apply the mount: Peel the red backing from the adhesive tape, press the mount firmly onto the chosen location, and let it set for a few hours before attaching the camera.
- Attach the camera: Push the Ring Indoor Plus Camera into the mount until it clicks. The rear overhang keeps the camera secure. Route the power cable through the access hole at the back of the mount.
Screw mount setup
For a more permanent installation, use the screw method. This works on wood and other drillable surfaces.
- Mark and drill: Position the mount, mark the screw holes, and drill pilot holes if needed. Insert the wall plugs for drywall or masonry.
- Secure the mount: Use the included screws and washers to attach the mount. Add the screw caps for a finished look.
- Attach the camera: Push the camera into the mount. The tilted angle of the hanger helps improve room coverage. Route the power cable through the rear access hole.
Placement tips for better coverage
The mount holds the camera at a tilted angle, which can reduce blind spots compared to a flat surface placement. Position the mount at a height and location where the camera's field of view covers the area you want to monitor. The wall mount keeps the camera safe and secure while giving you the best possible viewing position.
Product details that matter for installation
-
Wall Mount for Ring Indoor Plus Camera – Easy Install Custom Fit Bracket with 3M VHB Tape & Screws for Secure Mounting – Better Viewpoint & Stability: This wall mount is specially designed for the Ring Indoor Plus Camera only, and is not compatible with any other Ring Indoor cameras. Ensures you buy the correct mount for your camera model.
Wall Mount for Ring Indoor Plus Camera – Easy Install Custom Fit Bracket with 3M VHB Tape & Screws for Secure Mounting – Better Viewpoint & Stability
-
Wall Mount for Ring Indoor Plus Camera – Easy Install Custom Fit Bracket with 3M VHB Tape & Screws for Secure Mounting – Better Viewpoint & Stability: Do not place on painted, damp, or plastered walls. These are not suitable surfaces for adhesive mounting. Adhesive may fail on these surfaces, leading to the camera falling.
-
Wall Mount for Ring Indoor Plus Camera – Easy Install Custom Fit Bracket with 3M VHB Tape & Screws for Secure Mounting – Better Viewpoint & Stability: All hardware is included for screw mounting: screws, washers, wall plugs, and screw caps. No extra trip to the hardware store needed for a screw installation.
-
Wall Mount for Ring Indoor Plus Camera – Easy Install Custom Fit Bracket with 3M VHB Tape & Screws for Secure Mounting – Better Viewpoint & Stability: The power cable exits via an access hole to the rear of the hanger. Lets you hide the cable neatly behind the mount for a cleaner install.
