What the Uptown Rider is for

The Roma Uptown Rider Toddler Seat is a ride-on board with a belted seat that attaches to the side of your pushchair. It gives a toddler their own spot beside you, which can eliminate the need for a double pram when an older child wants to ride rather than walk.

It is designed for children from 12 months up to a maximum weight of 25kg. The seat has padding that is removable and washable, and the board runs on four wheels for stability. A toddler steering wheel is included as part of the setup.

How to attach the Uptown Rider to your pushchair

The supplied instructions are deliberately short: strap your child in the seat and attach the bar to your pushchair. Work through these steps in order so the board is secure before your child gets on.

  1. 1. Check the attachment point: The Uptown Rider fits to the handle or chassis of nearly every pram or pushchair. Identify which part of your pushchair the bar will clamp to before you start, and make sure that area is clear of other accessories.
  2. 2. Attach the bar to the pushchair: Fix the bar to the handle or chassis as supplied. The board sits to the side of the pushchair, leaving extra space for the parent to walk.
  3. 3. Fit the seat and padding: The padded seat is the part your child sits in. Check the padding is in place and the seat is secure before anyone sits on it.
  4. 4. Strap your child in: Use the belted seat to strap your child in before you set off. The seat is intended for one child at a time, from 12 months up to 25kg.
  5. 5. Do a stationary check: With your child seated and strapped in, check the board is stable and the bar is firmly attached. All four wheels should be in contact with the ground on a flat surface.

Key product details before you fit

  • Roma Uptown Rider Toddler Seat: Can be used from 12 months up to a max weight of 25kg This is the age and weight range the seat is designed for, so check your child's weight before first use.

    Roma Uptown Rider Toddler Seat

    Roma Uptown Rider Toddler Seat

  • Roma Uptown Rider Toddler Seat: Fits nearly every pram or pushchair as it fits to the handle or chassis Confirms the two possible attachment points so you can plan where the bar will go on your pushchair.

  • Roma Uptown Rider Toddler Seat: Four wheels make for even more stability Four wheels support the board at the side of the pushchair, which matters when your toddler is seated rather than standing.

  • Roma Uptown Rider Toddler Seat: Includes seat padding - removable and washable The padding can be taken off for cleaning, which is useful for a seat a toddler uses regularly.

Where the Uptown Rider should not be used

The Uptown Rider is not suitable for uneven surfaces such as gravel. Keep to smooth, even ground when your child is riding.

Children must alight when using up and down kerbs or on slopes. In practice, that means asking your child to get off the seat before you mount a kerb or navigate a slope, then strapping them back in once you are on level ground.

Children must always be supervised when using the Uptown Rider. The seat gives your toddler a place to ride, but it does not replace your attention.

Rider board safety tips for everyday use

  • Keep to smooth ground: Avoid gravel and other uneven surfaces, which the Uptown Rider is not suitable for.
  • Get off for kerbs and slopes: Your child must alight when going up or down kerbs and on slopes, then be strapped back in afterwards.
  • Stay within the weight limit: The seat is for children from 12 months up to a maximum of 25kg.
  • Supervise at all times: Children must always be supervised when using the Uptown Rider.
  • Recheck the attachment: After fitting the bar to the handle or chassis, confirm it is secure before each journey.

Uptown Rider vs the other Roma ride-on boards

Roma makes three ride-on boards, and the difference is where your child sits. The Roma 4 Rider attaches to the axle of your pram, so your child rides in front of you. The Uptown Rider and the Side Rider both attach to the side of your pram chassis, so your child rides to the side.

The Side Rider has a lay-back seat unit, a hood and includes a rain cover. The Uptown Rider has a belted seat with removable, washable padding and a toddler steering wheel. All three have four wheels for extra stability.

If you want your toddler beside you rather than in front, the Uptown Rider is the side-mounted option with a seat and steering wheel. If you need a lay-back seat and hood, the Side Rider is the one to compare against.

What the supplied information does not settle

The supplied details do not list the exact pushchair models the Uptown Rider is confirmed to fit, beyond the statement that it fits nearly every pram or pushchair via the handle or chassis. Check your own pushchair's handle or chassis before buying if you are unsure.

The instructions do not give a specific torque, angle or tightening sequence for the bar. Follow the fitting guidance that comes with the board and make sure the bar is firmly attached before use.