What to Expect from the Sabertooth Cerberus Kit
The Sabertooth Cerberus is a solid metal miniature from the Malifaux Classics line, a selection of early Wyrd releases preserved for collectors, painters, and longtime players. This three-headed beast brings enormous paws, layered fur, and a full committee of fangs to Marcus’s menagerie. The kit includes the metal model and a premium round base. The miniature is supplied unpainted, and preparation and assembly may be required.
Because this is a legacy product, retail packaging and stat cards are not guaranteed. The model is cast in 32mm heroic-scale metal, so you’ll need to clean mold lines and possibly pin parts for a secure fit.
Assembly Steps for the Sabertooth Cerberus
These steps follow standard metal miniature assembly practices. Always work in a well-ventilated area and use appropriate safety gear when cutting, filing, or using adhesives.
- Clean the Metal Parts: Use a hobby knife and fine files to remove mold lines and flash from the metal casting. Pay special attention to the three heads and the paws, where detail is most visible.
- Dry-Fit the Model: Before applying glue, hold the parts together to check alignment. The Sabertooth Cerberus has a solid, chunky design, but dry-fitting helps you plan where to apply pressure during assembly.
- Pin the Joints (Recommended): Metal miniatures benefit from pinning to strengthen joints. Drill small holes into the contact surfaces of the heads and body, then insert a short length of paperclip or brass rod with super glue. This prevents the model from coming apart during handling or gaming.
- Glue the Parts Together: Apply a medium-viscosity cyanoacrylate (super glue) to the pinned joints and press firmly. Hold each joint to set as directed in the product instructions. For the base, use the same glue to attach the model’s feet to the premium round base.
- Let the Glue Cure Fully: Allow the assembled miniature to sit undisturbed for at least a few hours. This ensures the bonds are strong enough for painting and tabletop use.
Sabertooth Cerberus Product Details
-
Malifaux Classics: Sabertooth Cerberus: Legacy 32mm heroic-scale cast-metal miniature The 32mm scale matches the Malifaux line, so the Cerberus will fit alongside other models in your crew. The metal construction gives it a satisfying weight but requires extra preparation compared to plastic kits.
Malifaux Classics: Sabertooth Cerberus
-
Malifaux Classics: Sabertooth Cerberus: Supplied unpainted; preparation and assembly may be required You’ll need to clean, assemble, and paint the model yourself. This is typical for Malifaux Classics and gives you full control over the finish.
-
Malifaux Classics: Sabertooth Cerberus: Important legacy product notice: retail packaging and stat cards are not guaranteed If you’re a tournament player or collector who values original packaging, be aware that this kit may arrive without a box or cards. The focus is on the metal sculpt itself.
Painting and Finishing Tips
After assembly, wash the metal miniature with warm soapy water to remove any oils or residue from handling. Rinse and let it dry completely before priming. A spray primer designed for metal models will give you a good base for acrylic paints.
The Sabertooth Cerberus has layered fur and multiple heads, so take your time with drybrushing and shading to bring out the texture. The three heads can be painted in slightly different colors to emphasize the beast’s monstrous nature.
What the Listing Does Not Settle
The supplied information does not include specific assembly instructions or a painting guide from the manufacturer. The steps above follow general best practices for metal miniatures. If you prefer official instructions, check the Wyrd Games website or community resources for additional guidance.
Stat cards and retail packaging are not guaranteed with this legacy product, so plan accordingly if you need those items for gameplay or display.
