About the SafeMax 3-in-1 Booster Seat
The Evenflo SafeMax 3-in-1 combination seat is designed to grow with your child, offering three modes of use: a harness booster, a high back booster, and a no back booster. It accommodates children from 22 to 120 pounds, making it a long-term investment in your family's travel safety. The seat features rollover-tested SafeMax technology and sporty styling with dual cup holders that appeal to older kids.
SafeMax 3-in-1 at a Glance
-
SafeMax 3-In-1 Booster Car Seat Support: This seat can be used as a harness booster, high back booster, & a no back booster. You can keep your child in a familiar seat from toddler years through elementary school, adjusting the mode as they grow.
SafeMax 3-In-1 Booster Car Seat Support
-
SafeMax 3-In-1 Booster Car Seat Support: The seat accommodates children ranging from 22-120 lbs. This wide weight range means you won't need to buy multiple seats as your child grows.
Setting Up Each Mode
The SafeMax 3-in-1 transitions between three modes. Below are the general steps for each configuration. Always consult the product manual for your specific vehicle and seat position.
- Harness Booster Mode: Use this mode for younger children who still need a 5-point harness. Install the seat using the vehicle's LATCH system or seat belt, following the manual's routing path. Adjust the harness height so it is at or just below your child's shoulders.
- High Back Booster Mode: Once your child outgrows the harness (check the manual for weight limits), remove the harness and use the vehicle's lap and shoulder belt with the high back booster. The back provides head and side support.
- No Back Booster Mode: For older children who meet the height and weight requirements, detach the backrest. The seat becomes a low-profile booster that positions the vehicle belt correctly across the child's lap and shoulder. Use only in vehicles with head restraints.
Installation Tips for Each Mode
Regardless of mode, ensure the seat is tightly installed with minimal movement at the belt path. For harness mode, the chest clip should be at armpit level and the harness snug against your child. In high back mode, the vehicle belt should lie flat across the shoulder and lap, not touching the neck or stomach. For no back mode, confirm the vehicle's head restraint is properly adjusted behind your child's head.
When to Transition Between Modes
The SafeMax 3-in-1 supports children from 22 to 120 pounds, but the transition points depend on your child's size and the seat's specific limits. Move from harness to high back booster when your child exceeds the harness weight or height limit stated in the manual. Switch to no back booster only when your child meets the minimum requirements for that mode and the vehicle has adequate head support. Regularly check that your child's ears are below the vehicle's head restraint or seat back in no back mode.
What the Supplied Information Confirms
- SafeMax 3-In-1 Booster Car Seat Support: The SafeMax 3 in 1 combination seat allows your family to travel with peace of mind and provides extended safety allowing you to transition the seat between 3 different modes of use. You can rely on a single seat design that has been tested for rollover safety, reducing guesswork when moving your child to the next stage.
