Start with what's actually in the box

The BattleTech SalvageBox: Legendary Warriors is a blind box, so the first step of any build is finding out which miniature you received. Each box contains one random, high-quality, fully assembled, unpainted miniature from a set of 11 units previously released in Legendary MechWarriors I, II, and III. You also get one MechWarrior card and one Alpha Strike card.

Because the miniature is already assembled, you won't be gluing limbs or torsos together. Your assembly work is really about checking the model, deciding on a base treatment, and preparing the surface for paint. That's good news for beginners, but it also means you should inspect the figure before you start handling it roughly.

What the catalog confirms

  • BattleTech SalvageBox: Legendary Warriors [Individual]: BattleTech SalvageBox Legendary Warriors is a blind-box containing 1 random, high-quality, fully assembled, unpainted miniature, plus 1 MechWarrior card and 1 Alpha Strike card. Knowing the model is pre-assembled and unpainted tells you the build phase is mostly inspection and basing, not glue work.

    BattleTech SalvageBox: Legendary Warriors Individual

    BattleTech SalvageBox: Legendary Warriors [Individual]

  • BattleTech SalvageBox: Legendary Warriors [Individual]: Miniatures are random from a set of 11 units previously released in Legendary MechWarriors I, II, and III. Your basing and paint plan should stay flexible until you open the box, since you can't choose the 'Mech in advance.

A simple build sequence for your random 'Mech

Treat this as a checklist you can adapt to whichever of the 11 units you receive. The steps below focus on handling, basing, and paint prep rather than construction.

  1. Open the box and identify your miniature: Compare the figure to the MechWarrior and Alpha Strike cards included. The cards help you confirm which unit you have and give you a reference for its intended role.
  2. Inspect the model before handling: Check for any visible issues from shipping or casting. Since the miniature is fully assembled, you're looking for bent parts or loose material rather than missing glue joints.
  3. Test-fit your base: Set the miniature on your chosen base without glue. Check that the feet sit flat and that the pose doesn't overhang awkwardly. Adjust the position before committing.
  4. Attach the miniature to the base: Once you're happy with the placement, glue the feet down. Use a small amount of glue and hold until set. If you're unsure which adhesive suits your model's material, check the manufacturer's guidance or test on a hidden area first.
  5. Add basing texture: Apply your basing material around the feet, leaving the miniature itself clean. Work in small sections so you can correct mistakes before the texture sets.
  6. Clean up and prep for paint: Remove any stray texture from the miniature's surface. Once the base is dry, the model is ready for primer and paint.

Basing choices that suit a blind-box build

Because you don't know which unit you'll get, keep your basing scheme neutral enough to work with any of the 11 possible miniatures. A simple texture paste or sand finish in a muted earth tone will suit most BattleTech tables and won't clash with whatever paint scheme you choose later.

If you plan to use the Alpha Strike card for gameplay, check that your base size matches what your group expects. The supplied information doesn't specify a base size for this product, so confirm with your local players or the card's stats before you glue anything down permanently.

Prepping the surface for paint

The miniature is unpainted, so a little prep goes a long way. These steps are general good practice for miniatures and don't require special tools.

  • Wash the model gently: Molded miniatures can carry release agent or handling oils. A brief wash in mild soapy water and a thorough dry helps primer adhere. This is general hobby advice, not a manufacturer instruction for this specific product.
  • Prime in thin coats: Spray or brush primer in light passes rather than one heavy coat. Let each pass dry before adding more.
  • Check the cards for unit identity: The MechWarrior and Alpha Strike cards give you a reference for the unit's role, which can guide your paint scheme choices.

What the supplied information doesn't cover

The catalog entry confirms the contents and the pre-assembled, unpainted state of the miniature, but it doesn't include care instructions, safety warnings, or a recommended base size. If you need those details, check the packaging or contact the manufacturer rather than assuming.

That's not a reason to avoid the product; it just means you should confirm any table-specific requirements with your play group before you finalize your basing.