Quick Answer
Build the Sanrio Cinnamoroll Nanoblock by sorting pieces by color, following the diagram row by row, and pressing each brick firmly. Display the finished 2-inch figure on a shelf or inside a clear case to keep it dust-free.
Why the Nanoblock Difficulty Level Matters
The Cinnamoroll Kimono set has a difficulty level of 2 out of 5, meaning it's designed for ages 12 and up. This is a good entry point if you're new to nanoblocks because the 160 pieces are manageable and the instructions are clear. However, the tiny brick size (4mm x 4mm) means you need patience and good lighting—rushing can cause pieces to pop off or be placed incorrectly.
Choosing a Display Spot
At only 2 inches tall, this figure fits easily on a desk, bookshelf, or inside a display cabinet. Direct sunlight can fade the printed details on the kimono over time, so pick a spot away from windows if you want the colors to stay vibrant. A small acrylic riser or a dedicated nanoblock display case helps keep it upright and dust-free.
How to Build and Display Your Cinnamoroll Nanoblock
- 1. Sort and Prepare: Open the bag and separate pieces by color using the included sorting tray or a small bowl. Refer to the instruction booklet to identify each piece type. Common mistake: mixing similar shades (e.g., white and off-white) can lead to errors later. Checkpoint: verify you have all 160 pieces before starting.
- 2. Build the Base and Body: Start with the base plate and follow the diagram from bottom to top. Press each brick firmly until you hear a soft click—nanoblocks need a snug fit. Common mistake: skipping the base alignment can make the figure wobbly. Checkpoint: after every 10 pieces, compare your build to the diagram.
- 3. Attach the Kimono Details: Add the kimono pattern pieces one row at a time. The printed details are on specific bricks, so double-check their orientation before pressing down. Common mistake: placing a printed brick upside down will break the pattern. Checkpoint: hold the figure up to a light to see if the pattern lines match. If a piece feels loose, swap it with a spare from the same color batch.
- 4. Finish with the Head and Ears: Attach the head section, then add the ears last. The ears are small and fragile—use tweezers if your fingers feel clumsy. Common mistake: pressing too hard on the ears can snap the connection point. Checkpoint: gently wiggle each ear to ensure it's secure.
- 5. Display and Protect: Place the finished figure on a clean, level surface. For long-term display, use a small acrylic case or a dust cover to prevent dust buildup in the tiny crevices. Common mistake: putting it near a window or heat source can warp the plastic over time. Checkpoint: check the figure monthly for loose bricks and press them back in. Rotate the figure occasionally if it's in direct light to prevent uneven fading.
Product Details
-
Sanrio Cinnamoroll Kimono Nanoblock Character Collection Series Constructible Figure: This constructible figure stands about 2 inches tall and uses 160 meticulously designed pieces with a difficulty level of 2, recommended for ages 12 and up. The 2-inch finished size means it fits easily into most display setups, and the moderate difficulty makes it a satisfying build without being overwhelming for beginners.
Sanrio Cinnamoroll Kimono Nanoblock Character Collection Series Constructible Figure