Quick answer
Display your Gojo & Geto statue on a stable, low-traffic shelf away from direct sun, and dust it every two to three weeks with a soft brush. Handle it only by the base, and keep liquids and heat sources well away from the resin.
Why resin needs a different routine than PVC figures
Resin statues are heavier and more brittle than typical PVC figures, so a knock against a shelf edge can chip a hair strand or effect part. The trade-off is that resin holds fine detail well, which is exactly why the Gojo & Geto piece rewards careful placement rather than frequent handling.
Dust is the main long-term enemy. Left alone, it settles into crevices around the blindfold, hair, and clothing folds, and wiping with a dry cloth can grind particles into the surface. A soft brush lifts dust without pressure.
Placement: where the statue should and should not go
A 24cm tall statue fits comfortably on a standard bookshelf or display cabinet, but avoid the top of a high bookcase where vibration from doors or footsteps is strongest. Keep it out of direct sunlight; UV exposure can fade paint over time, and the effect is cumulative.
Humidity is the other quiet risk. Avoid bathrooms, kitchens, and windowsills where condensation forms. A stable indoor room with moderate humidity is safer than a dramatic display spot.
Step-by-step display and care routine
- Choose a stable, shaded shelf: Pick a spot at or below eye level on a solid shelf, away from windows and doors. Check that the shelf can take the statue's weight without bowing. Common mistake: placing it on a high, narrow shelf where vibration from closing doors can tip it. Press down gently on the empty shelf first to feel for wobble before setting the statue down.
- Handle only by the base: Lift the statue with both hands under the base, never by the hair, limbs, or effect parts. Set it down slowly and check that it sits flat. Common mistake: grabbing a protruding element to adjust the angle, which stresses thin resin. If you need to rotate the statue, lift it completely rather than dragging it across the shelf.
- Dust every two to three weeks with a soft brush: Use a clean, dry makeup brush or soft paintbrush to sweep dust from top to bottom, working into hair and clothing folds with light strokes. Common mistake: using a cloth or paper towel, which can catch on sharp details and leave lint. Keep the brush dedicated to the statue so it does not transfer oils or grit.
- Keep liquids and heat away: Do not use water, glass cleaner, or alcohol on the resin. If a spot needs attention, stop and contact the store for advice rather than experimenting. Keep the statue at least a foot from lamps that generate heat. Common mistake: misting a cloth and wiping the surface, which can leave residue in seams. Store the statue away from radiators and space heaters, especially during winter.
- Do a monthly stability check: Once a month, confirm the statue still sits flat, the base is not scratched, and no parts feel loose. If you move it to a new shelf, repeat the stability check there. Common mistake: assuming a statue that stood safely for months cannot shift after a cleaning. Mark a calendar reminder so the check does not get skipped.
Product facts
-
1/6 Scale Satoru Gojo & Suguru Geto - Jujutsu Kaisen Resin Statue - WM Studios: 1/6 scale, 24cm tall, made of resin and PU by WM Studios. The 24cm height fits most shelves, and the resin-PU mix means you should treat it as a display piece rather than a toy to be frequently repositioned.
1/6 Scale Satoru Gojo & Suguru Geto - Jujutsu Kaisen Resin Statue - WM Studios
