Quick answer
The Vanquish Scale SLW Hub Screw Kit includes 12 pieces of 4-40 hardware designed to replicate fullsize lugnut appearance. Install them using a 3mm hex driver, ensuring you use the correct length for your wheel and hub combination.
Why choose the Scale SLW Hub Screw Kit?
The kit uses 4-40 threaded screws with a maximized 3mm hex head for strength during installation and removal. The extended length is intended for Vanquish wheels paired with an SLW hub and one ring. If you have a different wheel or hub setup, verify fitment before purchase.
How to install the Scale SLW Hub Screw Kit
- 1. Gather tools and check fitment: You need a 3mm hex driver. Verify that your wheel, SLW hub, and ring combination matches the extended length of these screws. Common mistake: using them with a non-Vanquish wheel that requires a different screw length. If the screws bottom out before snug, stop and recheck your hub stack.
- 2. Insert the screws through the hub and wheel: Align the SLW hub with the wheel mounting holes. Thread each screw by hand through the hub and into the wheel. Common mistake: cross-threading the 4-40 threads, which can damage the hub. Turn the screw counterclockwise until you feel it drop into the thread, then turn clockwise.
- 3. Tighten evenly with a 3mm hex driver: Use the hex driver to snug each screw in a star pattern. Apply firm, even pressure—do not overtighten. Common mistake: overtightening can strip the threads or deform the scale hex head. Stop turning as soon as the screw head contacts the hub surface; no further torque is needed.
Product facts
-
Scale SLW Hub Screw Kit - Long: Includes 12 pieces of 4-40 hardware styled to replicate fullsize vehicle lugnuts. This gives your RC crawler a realistic scale appearance while providing a secure, strong connection.
Scale SLW Hub Screw Kit - Long