Why the Sea Mist Lid Works with Your Original memobottle

The Sea Mist Lid is designed specifically for the Original memobottle shape. It uses the same threaded cap and silicone seal as other memobottle lids, so swapping it onto your bottle takes only a few seconds. The soft sea-green color adds a fresh, coastal look to your everyday carry.

Sea Mist Lid at a Glance

  • Sea Mist Lid (Original memobottle): All memobottle Lids are equipped with a durable and reliable silicone seal made from the highest quality materials, ensuring your memobottle can be trusted when placed with your precious valuables. The silicone seal is the key to leak resistance. This lid can sit in a bag next to electronics or documents without worry.

    Sea Mist Lid (Original memobottle)

    Sea Mist Lid (Original memobottle)

  • Sea Mist Lid (Original memobottle): This lid is not dishwasher-friendly. Heat and harsh detergents can damage the silicone seal and fade the color. Hand washing is required to keep the lid functioning and looking new.

  • Sea Mist Lid (Original memobottle): This product includes 1 x Lid. You get a single lid replacement or spare. No bottle or additional parts are included.

How to Fit the Sea Mist Lid on Your Original memobottle

Installing the Sea Mist Lid is straightforward and takes less than a minute.

  1. Remove the existing lid: Unscrew the current lid from your Original memobottle by turning it counterclockwise. Set it aside.
  2. Align the Sea Mist Lid: Place the Sea Mist Lid on the bottle opening, making sure the threads line up evenly. The silicone seal should sit flush against the rim.
  3. Tighten securely: Turn the lid clockwise until it is snug. Avoid overtightening – hand-tight is enough to create a reliable seal.
  4. Test for leaks: Fill the bottle with water, close the lid, and turn it upside down over a sink to confirm no drips escape.

Caring for Your Sea Mist Lid

To keep the silicone seal effective and the color vibrant, hand wash the lid with warm water and mild dish soap. Use a soft sponge or cloth to clean the threads and the underside of the seal. Rinse thoroughly and let it air dry completely before storing or reattaching. Avoid abrasive scrubbers, bleach, or soaking in hot water, as these can degrade the silicone and the finish.