Quick Answer
Assemble the Selway 6p carbon fiber center pole by connecting the five pieces in order, leaving the adjustable end for last, then fine-tune the tension after the tent is up.
Why the Center Pole Matters
The Selway 6p carbon fiber center pole is the backbone of your tent's structure. It holds up the peak, giving you headroom and shedding rain or snow. Getting the setup right means a taut, stable shelter that stands up to wind.
Because the pole is made of premium carbon fiber, it's both lightweight and robust. That makes it easy to pack, but it also means you should handle it with care—carbon fiber can be brittle if you force it or step on it.
Step-by-Step Setup
- Lay out the pieces: Unpack the pole and lay the five sections on the ground in order, from the base to the tip. Identify the adjustable end—it will have a twist or sliding mechanism. Keep the adjustable end near the top of the tent, as you'll use it to fine-tune tension. Check that you have all five pieces before starting; a missing section will make the pole too short.
- Connect the sections: Insert each section into the next, aligning the male and female ends. Push firmly but do not force—carbon fiber can crack if you twist or bend it. Work from the base upward, leaving the adjustable end for last. If a joint feels stuck, realign the sections rather than applying more force.
- Position the pole in the tent: With the tent laid out, insert the base of the pole into the designated grommet or pocket at the tent floor. Then lift the pole and guide the top into the peak loop or sleeve. Make sure the pole is not twisted. Always match the pole base to the correct corner—using the wrong grommet will distort the tent shape.
- Adjust the tension: Once the pole is in place, use the adjustable end to lengthen the pole until the tent fabric is taut. Start with a small adjustment and check the overall shape. The tent should stand without sagging, but the pole should not bow excessively. Over-tightening can stress the pole and fabric—stop as soon as the fabric is smooth.
- Secure and check: Fasten any clips or ties that hold the pole to the tent. Walk around the tent and check that the pole is straight and the seams are aligned. Adjust the pole length if you see wrinkles or loose spots. A quick visual check now prevents problems during a storm later.
Product Facts
-
Selway 6p Carbon Fiber Center Pole: The Selway carbon fiber center pole is designed to fit our Selway 6p Tent, comes in 5 pieces with one adjustable end, and is quick to set up and adjustable. Knowing the pole has five sections and an adjustable end helps you identify the correct assembly order and fine-tune the fit for a stable pitch.
Selway 6p Carbon Fiber Center Pole