What the MTC-P Extreme 2 Seat Insert Does
The Sensit Haptics MTC-P Extreme 2 is a seat insert that adds tactile feedback directly to a compatible simulator seat. It uses 14 actuators (four high-performance bass shakers and ten high-fidelity magnetic actuators) distributed through the seat, centre, back and shoulder pads. This layout is designed to separate effects around the driver's body rather than producing one general vibration through the complete rig.
The system can distinguish effects such as ABS, wheel slip, kerbs, suspension movement, engine vibration and gear changes across eight spatial channels. The active 100 W system includes its own control unit and power supply, so a separate audio amplifier is not required.
Choosing the Right Size for Your Seat
The MTC-P Extreme 2 is available in Regular Size and XL Size. Both use the same main pad set, but the XL package additionally includes an extension pad.
Regular Size is compatible with the GT seat supplied with the SimXPro GT cockpit. XL Size is compatible with the SimXPro GTR Seat.
Important: The insert is not compatible with the SimXPro XL Reclining Seat. That seat does not support the cushion inlays required for installation.
Key Specifications at a Glance
-
Sensit Haptics - MTC-P Extreme 2 - Seat Haptics Insert: The MTC-P Extreme 2 uses 14 actuators: four high-performance bass shakers and ten high-fidelity magnetic actuators. This actuator mix allows separate effects around the driver's body, improving immersion and feedback clarity.
Sensit Haptics - MTC-P Extreme 2 - Seat Haptics Insert
-
Sensit Haptics - MTC-P Extreme 2 - Seat Haptics Insert: Sensit Haptics specifies an effects range up to 20 kHz and latency below 5 ms. Wide frequency range and low latency help the system respond quickly to in-game events for realistic haptic feedback.
-
Sensit Haptics - MTC-P Extreme 2 - Seat Haptics Insert: The control unit connects to a Windows PC through USB-C to USB-A and uses a 19 V power adapter. Wired USB connection ensures stable data transfer and power, with no need for an external audio amplifier.
Installation Steps
The pads are secured to a suitable seat with the supplied 3M hook-and-loop straps. Follow these general steps:
- 1. Prepare the seat: Ensure your seat is compatible (Regular Size for SimXPro GT cockpit seat, XL Size for SimXPro GTR Seat). The XL Reclining Seat is not compatible.
- 2. Position the pads: Place the seat pad, centre pad, back pad and shoulder pad on the seat according to the user manual. Use the hook-and-loop straps to secure them firmly.
- 3. Connect the control unit: Connect the control unit to the pads using the wired connections. Then connect the control unit to your Windows PC with the supplied USB-C to USB-A cable and plug in the 19 V power adapter.
- 4. Install software: Sensit Haptics supports SimHub for general game compatibility and its SimRacing Cockpit App for profiles, effect adjustment and 100 Hz telemetry capture in supported titles. Install the software from the manufacturer's site.
- 5. Configure effects: Use the SimRacing Cockpit App or SimHub to adjust individual effect levels (e.g., ABS, wheel slip, kerbs) and assign them to specific actuators or spatial channels.
Tuning Tips for Better Haptic Feedback
Start with conservative effect levels to avoid overwhelming sensations. Gradually increase intensity for effects that matter most to your driving, such as wheel slip or brake lockup. Use the spatial channel separation to distinguish front and rear grip loss.
The backrest section combines two bass shakers with six high-fidelity shakers, while the seat section uses two bass shakers and four high-fidelity shakers. You can configure the system to communicate vehicle behaviour through distinct areas of the seat, including changes in road texture.
If you use SimHub, explore community profiles for your favorite sims to save time on initial setup.
What's in the Box
The package includes: seat pad, centre pad, back pad and shoulder pad, Metahaptics control unit, power adapter, 3M hook-and-loop straps, USB-C to USB-A cable, and user manual.
The Regular Size shipping weight is 4.3 kg and the XL Size is 4.4 kg.
