Which Sepura Models Use This Battery?
The CELLONIC replacement battery is designed for several Sepura two-way radio models. The listing specifically mentions the STP9000, STP8000, SC2020, SC20, SC21, STP8X, STP8038, STP9038, SC2024, and STP8040. If you own one of these radios and need a fresh power source, this 1880mAh lithium-polymer battery is a direct replacement for part numbers 300-00631, 300-00634, and 300-00635.
Before ordering, double-check your radio's model number and existing battery part number. The listing does not confirm compatibility with models outside this list, so it's best to verify if your device isn't named.
Battery Specifications at a Glance
-
Battery for Sepura STP9000, SC20, SC2020, SC21, STP8000, STP8X, STP8038, STP9038, SC2024, STP8040 7.4V 1880mAh Lithium-Polymer from CELLONIC: Replacement Sepura STP9000, STP8000, SC2020, SC20, SC21, STP9038 Battery 300-00631, 300-00634, 300-00635 1880mAh This confirms the exact part numbers and capacity, so you can match it against your original battery before purchasing.
Battery for Sepura STP9000, SC20, SC2020, SC21, STP8000, STP8X, STP8038, STP9038, SC2024, STP8040 7.4V 1880mAh Lithium-Polymer from CELLONIC
-
Battery for Sepura STP9000, SC20, SC2020, SC21, STP8000, STP8X, STP8038, STP9038, SC2024, STP8040 7.4V 1880mAh Lithium-Polymer from CELLONIC: 7.4V 1880mAh Lithium-Polymer from CELLONIC The voltage and chemistry must match your radio's requirements. 7.4V is standard for many Sepura radios; using a different voltage could damage the device.
-
Battery for Sepura STP9000, SC20, SC2020, SC21, STP8000, STP8X, STP8038, STP9038, SC2024, STP8040 7.4V 1880mAh Lithium-Polymer from CELLONIC: 3-Year Guarantee A longer warranty period indicates confidence in the product's durability and provides peace of mind for your investment.
Step-by-Step Battery Replacement
The supplied information does not include detailed installation instructions. The following steps are based on general best practices for replacing batteries in two-way radios. Always consult your radio's user manual for device-specific procedures.
- 1. Power off and remove the old battery: Turn off your Sepura radio completely. Locate the battery release latch on the back of the device. Slide or press the latch to unlock the battery, then carefully lift it away from the radio.
- 2. Inspect the battery compartment: Check the contacts inside the radio and on the new battery for any dirt or damage. Clean gently with a dry cloth if needed. Ensure no debris is present that could interfere with the connection.
- 3. Align and insert the new CELLONIC battery: Position the replacement battery so its contacts align with those in the radio. Slide it into place until it clicks securely. The battery should sit flush with the radio body.
- 4. Power on and test: Press and hold the power button to turn on your radio. Check that the device powers up normally and that the battery indicator shows a charge. If the radio does not turn on, remove and reinsert the battery, ensuring it is fully seated.
What the Listing Does Not Confirm
The CELLONIC listing does not include instructions for battery disposal, charging times, or specific installation steps. It also does not confirm compatibility with Sepura models not listed. If your radio is not in the supported list, or if you need disposal guidance, refer to your device's manual or contact the manufacturer.
Additionally, the listing does not specify whether the battery includes a protective circuit or the exact dimensions. For fit confirmation, rely on the model numbers provided rather than physical measurements.
