Start with the straps, not the size label

The Serpentine Bikini Top is built around two adjustable straps and an XL O ring at the front. That combination is the first thing to understand before you order, because it changes how the top sits on your body and how much fine-tuning you get once it arrives.

The record describes the straps as adjustable and the fabric as double layered, with the O ring as a large front detail. It does not list a specific tie method, strap length, or cup construction. So treat the straps as your main fit control and plan to adjust them in front of a mirror rather than assuming a fixed fit out of the box.

What the Serpentine record confirms

  • Serpentine Bikini Top: XL O ring detail with adjustable straps and double layered fabric. The O ring is a fixed front point; the straps are what you shorten or lengthen to change where the top sits.

    Serpentine Bikini Top

    Serpentine Bikini Top

  • Serpentine Bikini Top: Available in blue snakeskin print, red snakeskin print or plain black. Colour affects how the hardware reads against the fabric, which matters when you choose rose gold or silver.

  • Serpentine Bikini Top: Handmade to order, with up to seven days allowed for shipping. If you need the top for a specific date, order with that production window in mind rather than assuming next-day dispatch.

How to adjust the Serpentine for a swim-ready fit

The supplied information does not include a manufacturer tie diagram or a recommended strap length. Use these as general checkpoints while you adjust, and stop tightening if the straps dig in or the O ring pulls away from your chest.

  1. 1. Loosen both straps before you put the top on: Starting loose lets you position the XL O ring centrally without fighting tension. The record confirms adjustable straps, so use that range rather than pulling the top over your head at a fixed length.
  2. 2. Centre the O ring: The O ring is the visual anchor of the top. Check it sits level in a mirror before you tighten anything.
  3. 3. Tighten evenly, one side at a time: Adjust in small increments and alternate sides so the O ring stays centred. Uneven tension is the most common reason a front-detail top looks twisted.
  4. 4. Test movement before you get in the water: Reach forward, roll your shoulders and lift your arms. If the straps shift or the O ring lifts away, readjust before swimming rather than after.

Choosing size, colour and hardware

The Serpentine comes in sizes 4 and 6, in blue, red or black, with rose gold or silver hardware. That gives you twelve combinations, and the hardware choice is the one most people leave until last.

On plain black, rose gold adds warmth and silver reads sharper and more contrasty. On the blue and red snakeskin prints, both metals pick up the print differently, so it is worth deciding whether you want the hardware to blend or stand out. The record does not include a size chart or body measurements, so use the size options as your starting point and treat the adjustable straps as the fine adjustment rather than a substitute for choosing the right size.

Bikini top sizing tips that apply here

  • Choose the size first, then adjust: Adjustable straps can take up slack, but they cannot add coverage. Pick from sizes 4 or 6 based on your usual swimwear size, then use the straps to refine the fit.
  • Check the O ring position at your chosen size: The XL O ring is a fixed element. If it sits too high or too low once the straps are comfortably adjusted, that is a sign to revisit the size rather than over-tightening.
  • Order with the handmade window in mind: Because the top is handmade to order with up to seven days allowed for shipping, a last-minute order leaves no room to exchange a size before a trip.

After-swim care: what to do when you get out

The supplied product record does not include cleaning instructions, detergent guidance, drying advice or chlorine compatibility for the Serpentine Bikini Top. That means any specific wash temperature, soak time or detergent recommendation would be a guess, so this section sticks to what you can reasonably do without contradicting the manufacturer.

Rinse the top in fresh water after swimming to remove salt or pool water from the fabric and the O ring, then lay it flat to dry away from direct heat. Do not wring or twist the double-layered fabric, and do not tumble dry it. If you need confirmation on detergent or chlorine resistance, check the care label or ask the store before your first swim, since the listing does not state it.

Checkpoints before and after each swim

  • Before: strap tension: Re-check both adjustable straps after the top has been stored or washed, since they can shift in transit.
  • Before: O ring alignment: Make sure the XL O ring sits level and the fabric around it is not folded or pinched.
  • After: rinse and dry flat: Fresh water rinse, then flat drying. Avoid leaving the top bundled in a damp bag, which is the usual cause of stretched straps and lingering odour.
  • After: inspect the hardware: Check the O ring and strap attachments for looseness. The record does not specify hardware material, so if anything looks worn, stop wearing it and contact the store rather than repairing it yourself.