Start with your lens gear pitch, then pick the tooth count
The SHAPE Follow Focus Pro accessories are model-specific components, so the first check is not which gear looks right but whether your lens and follow focus are designed for the same interface. Both SHAPE gears here use a cinema 0.8 standard pitch, which is the starting point for matching a lens gear to a follow focus drive. If your lens is not set up for 0.8 pitch, neither gear is the correct starting point.
Once the pitch matches, the choice between 28 and 43 teeth becomes a question of how much focus travel you want per turn of the follow focus knob. The supplied product records do not state a recommended lens diameter, rod standard, or focus direction for either gear, so treat tooth count as a fit and feel decision to confirm against your own lens and rig rather than a universal rule.
28 teeth vs 43 teeth: what changes on set
Both gears are aluminum, both use the 0.8 mm cinema pitch, and both are intended for repeatable focus control on cinema and production rigs. The difference the catalog confirms is the tooth count: 28 teeth on model G028-0.8PRO and 43 teeth on model G043-0.8PRO. Use the model name and SKU to distinguish them when ordering.
- SHAPE Follow Focus Pro 0.8 mm 28 Teeth Pitch Gear (G028-0.8PRO): A 0.8 mm pitch gear with 28 teeth, constructed from aluminum. The smaller tooth count is the version to compare when your setup calls for the 28-tooth configuration; confirm the exact lens and follow focus fit before ordering.
- SHAPE Follow Focus Pro 0.8 mm 43 Teeth Pitch Gear (G043-0.8PRO): A 0.8 mm pitch gear with 43 teeth, also aluminum. The higher tooth count is the alternative when the 43-tooth configuration matches your lens and follow focus. Neither gear is confirmed for a specific lens diameter in the supplied record, so check clearance on your rig.
Gear evidence to check before you order
-
SHAPE Follow Focus Pro 0.8 mm 28 Teeth Pitch Gear: SHAPE Follow Focus Pro 0.8 mm 28 Teeth Pitch Gear, manufacturer SKU G028-0.8PRO, is a manual follow-focus component with a cinema 0.8 standard pitch and 28 teeth, constructed from aluminum. The 0.8 pitch and 28-tooth count are the two specs that determine whether this gear matches your lens and the feel of your focus throw.
SHAPE Follow Focus Pro 0.8 mm 28 Teeth Pitch Gear
-
SHAPE Follow Focus Pro 0.8 mm 43 Teeth Pitch Gear: SHAPE Follow Focus Pro 0.8 mm 43 Teeth Pitch Gear, manufacturer SKU G043-0.8PRO, is a manual follow-focus component with a cinema 0.8 standard pitch and 43 teeth, constructed from aluminum. The 43-tooth version is the one to compare when your setup calls for the higher tooth count; the SKU prevents mixing it up with the 28-tooth gear.
SHAPE Follow Focus Pro 0.8 mm 43 Teeth Pitch Gear
How to choose between the two gears
Use this sequence to narrow the choice without guessing at specifications the catalog does not provide.
- Confirm the lens pitch: Both SHAPE gears are 0.8 mm pitch. If your lens gear ring is not 0.8 pitch, stop here and look for a matching gear instead.
- Check the follow focus model: The gears are designed for use with the SHAPE Follow Focus Pro. Confirm that is the follow focus on your rig before ordering.
- Decide on tooth count against your lens and rig: Compare the 28-tooth G028-0.8PRO and 43-tooth G043-0.8PRO against your lens diameter and available clearance. The supplied record does not state a recommended lens size for either gear, so this is a physical check on your own setup.
- Order by SKU: Use G028-0.8PRO or G043-0.8PRO to distinguish the two configurations. Each box contains one unit.
Where the marking disc fits in a repeatable focus setup
The SHAPE Follow Focus Pro Marking Disc (model MARKDISCPRO) is a replacement or additional marking disc for the Follow Focus Pro. It gives a focus puller or camera assistant a surface to mark focus points with a dry erase marker and wipe them away for the next shot. That makes it a workflow accessory rather than a gear: it does not change pitch or tooth count, and it is not confirmed to fit any follow focus other than the Follow Focus Pro.
A practical order of operations is to settle the gear first, then add the marking disc. The gear determines how the follow focus engages the lens; the disc gives you a place to record the marks you repeat during the take. If you are building a kit from scratch, the marking disc is the lower-risk addition once the gear interface is confirmed, because its supplied role is tied to the Follow Focus Pro rather than to a specific lens.
Marking disc evidence
- SHAPE Follow Focus Pro Marking Disc: SHAPE Follow Focus Pro Marking Disc, manufacturer SKU MARKDISCPRO, provides a surface for a focus puller or camera assistant to mark focus points using a dry erase marker and quickly wipe them away for the next shot. This confirms the disc's job on set and that it is a replacement or additional disc for the Follow Focus Pro, not a universal marking surface.
Checks that prevent a wrong order
The supplied records are clear about model fit but do not confirm every rig variable. These are the checks the evidence supports.
- Pitch: Both gears are 0.8 mm cinema pitch. A lens gear ring of a different pitch is not a match.
- Tooth count: 28 teeth (G028-0.8PRO) and 43 teeth (G043-0.8PRO) are distinct configurations. The record does not state a recommended lens diameter for either, so verify clearance on your own lens and rig.
- Follow focus model: The gears and marking disc are named for the SHAPE Follow Focus Pro. The supplied information does not confirm compatibility with other follow focus units.
- Package contents: Each gear and the marking disc are supplied as one unit. If you need more than one, order the quantity you need.
- What is not confirmed: The supplied records do not state rod standard, focus direction, or installation steps for these components. Confirm those details against your rig and the manufacturer documentation before installing.
A simple decision for Canadian crews
If your Follow Focus Pro is already working with a 0.8 pitch lens and you are choosing a replacement gear, start with the tooth count that matches your current setup and confirm clearance on your lens. If you are adding marks to your focus pulls, the marking disc is the Follow Focus Pro-specific accessory for that job. Filmgear Canada supplies these SHAPE components for Canadian production crews, with Canada-wide shipping and support from Vancouver.


