Skinnie Minnie Magg 5.5" rigging questions
What does the Skinnie Minnie Magg 5.5" include for recovery?
The kit lists a 36" ripstop nylon parachute and a 15' 3/8" tubular nylon shock cord with sewn loops. The airframe is factory pre-slotted, and the fins are through-the-wall. The listing notes the design omits shock cord mounting hardware, so plan how you will anchor the cord before assembly.
How does the 38mm motor mount work with 29mm motors?
The kit has a 38mm motor mount with MR-1 Z-Clip motor retention, and it includes an MMA-2 38mm-to-29mm motor mount adapter. That means you can run 38mm motors directly or step down to 29mm with the included adapter. The listing does not supply motor recommendations beyond noting it flies on G motors and is robust enough for some Level 1 motors, so confirm your chosen motor and retention fit before launch.
What launch pad hardware does the kit use?
The listing specifies RB-1000 rail buttons for 10 series rails. Check that your pad has a compatible 10 series rail before heading out; the catalog does not list alternate launch lugs or buttons.
How big and heavy is the Skinnie Minnie Magg 5.5"?
It is 37" tall, 5.54" in diameter, and weighs 43 oz. Fins and rings are 1/8" thick. Those numbers matter for storage, transport, and checking your recovery layout, but the listing does not give a recommended center-of-gravity or stability margin.
Does the kit come with decals?
Yes, the listing confirms a decal, logo only. No other marking or finish details are supplied.
What skill level is this kit aimed at?
The listing lists complexity as Intermediate. It does not state an age range or certification requirement. The design is described as an homage to the 1986 lightweight Minie-Magg, which was intended as the largest production kit flyable without certification, but you should confirm any certification or site rules that apply to your motor choice.
Where can I find instructions and Rocksim files?
The listing references PK-68S Minie-Magg Instructions and a PK-68S Minie-Magg Rocksim file. Those are the documents to use for build order and simulation; the catalog summary itself does not include step-by-step assembly or operating instructions.
Catalog details that shape your build plan
-
Skinnie Minnie Magg 5.5": 38mm motor mount with MR-1 Z-Clip motor retention; MMA-2 38mm-29mm adapter included. This is the core of your motor and retention setup, and the adapter gives you a 29mm path without extra hardware.
Skinnie Minnie Magg 5.5"
-
Skinnie Minnie Magg 5.5": 36" ripstop nylon parachute and 15' 3/8" tubular nylon shock cord with sewn loops. These are the recovery components you will rig; the listing notes no shock cord mounting hardware, so anchoring is your call.
-
Skinnie Minnie Magg 5.5": 37" height, 5.54" diameter, 43 oz weight, 1/8" fins and rings. Use these to plan transport, storage, and recovery space.
