The load rating splits these two arms
Both arms mount accessories with 1/4″-20 screws, but they are built for different weights. The SmallRig Articulating Arm with Dual Ball Heads is rated to 5 kg/11 lb, while the SmallRig Universal Magic Arm with Ball Heads 2-Pack is rated at max. load <1 kg. That gap is the first thing to check before you pick one for a monitor, light or sound gear.
The next difference is adjustment. The articulating arm uses a single large thumb lever to secure both ball heads, and it includes a small hex key to further tighten the thumbwheel when a heavy device is attached. The magic arm uses a wingnut in the middle to adjust angles and positions. Neither arm comes with supplied installation steps, so plan your mounting points before you buy.
SmallRig Articulating Arm: what the record confirms
-
SmallRig Articulating Arm with Dual Ball Heads (1/4″-20 Screws): Load capacity: 5 kg/11 lb. This is the arm to consider when the accessory is heavy enough that a sub-1 kg arm would be the wrong tool.
SmallRig Articulating Arm with Dual Ball Heads (1/4″-20 Screws)
-
SmallRig Articulating Arm with Dual Ball Heads (1/4″-20 Screws): 1/4″-20 mounting screw at each end, with a tightening thumbwheel and rubber pads. The screws match common monitor, light and sound-gear mounting points, and the pads protect equipment from scuffing.
-
SmallRig Articulating Arm with Dual Ball Heads (1/4″-20 Screws): Both ball heads are secured with a single large thumb lever; a small hex key is included to further tighten the thumbwheel for heavy devices. One lever controls both joints, which simplifies repositioning, and the hex key gives you a way to add security when the load is near the top of the range.
-
SmallRig Articulating Arm with Dual Ball Heads (1/4″-20 Screws): Interchangeable with other SmallRig ball head parts such as 2132, 2133, 2134, 2211, 2114, 2108 and BUM2383. If you already own SmallRig ball heads, this arm can be reconfigured rather than replaced.
SmallRig Magic Arm 2-Pack: what the record confirms
-
SmallRig Universal Magic Arm with Ball Heads (2-Pack): Max. load <1 kg. This arm is for light accessories only; a heavier monitor or light is outside its stated rating.
SmallRig Universal Magic Arm with Ball Heads (2-Pack)
-
SmallRig Universal Magic Arm with Ball Heads (2-Pack): Each magic arm has 1/4″ screws at both ends and a wingnut in the middle to adjust angles and positions. The wingnut is the single adjustment point, so you set the angle by loosening and tightening one fastener.
-
SmallRig Universal Magic Arm with Ball Heads (2-Pack): It can attach a camera cage, top plate and Top Handle 1955/1984 on one end, and a monitor or video light on the other. This describes the intended mounting pattern, which helps you check whether your cage or handle is compatible.
-
SmallRig Universal Magic Arm with Ball Heads (2-Pack): The pack includes 2 universal magic arms with small ball head. Two arms let you mount two light accessories or keep a spare, which suits small rigs with several 1/4″-20 points.
Side-by-side on the details that decide the purchase
- Load capacity: Articulating arm: 5 kg/11 lb. Magic arm: max. load <1 kg. Choose by the weight of the accessory, not by the arm's size.
- Adjustment: Articulating arm: one large thumb lever secures both ball heads, plus a hex key for extra tightening. Magic arm: a central wingnut adjusts angles and positions.
- Mounting ends: Both use 1/4″-20 screws at each end. The articulating arm adds rubber pads and tightening thumbwheels; the magic arm record names cage, top plate and Top Handle 1955/1984 as one-end mounting options.
- Expandability: The articulating arm is listed as interchangeable with several SmallRig ball head parts. The magic arm record does not list interchangeable parts.
- Quantity: The magic arm is sold as a 2-pack. The articulating arm record shows a single Standard variant.
Which arm fits which rigging job
For a field monitor, LED light or sound gear that sits near the top of the articulating arm's 5 kg/11 lb rating, the dual ball head arm is the more sensible starting point. Its single lever lets you reposition both joints together, and the included hex key gives you a way to tighten the thumbwheel further when a heavy device is attached.
For a light monitor or video light on a cage or top handle, the magic arm 2-pack covers more mounting points for less weight per arm. The wingnut adjustment is quick, and two arms let you place a monitor and a small light without buying twice.
If you already own SmallRig ball head parts, the articulating arm's interchangeability with 2132, 2133, 2134, 2211, 2114, 2108 and BUM2383 may make it the more flexible long-term purchase. If you are starting from scratch with a small cage rig, the 2-pack gives you two complete arms.
What the records do not confirm
Neither product record supplies installation steps, so this comparison cannot tell you the exact order for attaching an arm to a cage or handle. The articulating arm record does not confirm compatibility with specific cages beyond the 1/4″-20 screw standard, and the magic arm record does not confirm whether its ball heads are interchangeable with other SmallRig parts. Check your cage, handle and accessory mounting points against the listed 1/4″-20 screws before you buy.

