Quick answer

Use the Aneros Soaker Device Cleaning System with household ingredients as directed, keep water at a comfortable warm temperature rather than hot, and let every part air-dry fully before storing it. Store the reusable system clean, dry, and away from moisture so it is ready for the next session.

Why water temperature matters more than soak time

Very hot water is a common instinct when cleaning, but it can stress the materials and electronic charging components the Soaker is designed to protect. Warm water does the cleaning work; longer soaking does not make up for water that is too hot.

If you are unsure, start slightly cooler than you think you need. You can always adjust on the next cleaning, but you cannot undo heat damage to sensitive parts.

When air-drying is not enough

Air-drying works for most routine cleanings, but humid bathrooms and closed cabinets slow evaporation. If parts still feel damp after a reasonable air-dry, give them more open air rather than putting them away. Storing damp parts is the most common cause of odors and repeated cleaning.

Soaker cleaning, drying, and storage questions answered

What water temperature should I use with the Soaker?

Use comfortably warm water, not hot. Hot water can stress the materials and the electronic charging components the system is designed to protect. If the water feels hot to your hands, let it cool before soaking. Test the water on your wrist first; if it is too hot for skin, it is too hot for the Soaker.

How do I dry the Aneros Soaker after cleaning?

Shake off excess water, then let all parts air-dry in an open, ventilated spot. Avoid sealing anything away while it is still damp. If you need to speed drying, place parts separately rather than stacked. Damp storage is the main cause of odors, so dry fully before putting anything away.

How should I store the Soaker between uses?

Store the reusable system clean and completely dry, away from moisture and humidity. A dry cabinet or drawer is better than a damp bathroom shelf. Keep it separate from wet items. A dry, ventilated storage spot is more important than a specific container.

Can I reuse the Soaker system, and how often should I clean it?

Yes, the system is reusable. Clean your massager after each use and clean the Soaker itself according to its instructions so residue does not build up. There is no fixed schedule; base it on use and how the parts look and feel. If parts feel filmy or smell stale, clean the system before the next use.

Do I need special cleaners with the Soaker?

No. The system is designed for an economical cleaning method using household ingredients. Follow the supplied directions rather than adding extra products, which may not be intended for the materials or electronic components. Stick to the household ingredients the system was designed for.

What should I avoid when cleaning electronic charging components?

Do not soak electronic charging components in hot water or leave them wet. The Soaker is designed to protect them, but that protection depends on keeping water temperature moderate and drying thoroughly. When in doubt, keep electronic parts drier and cooler than the rest.

Product facts

  • Aneros Soaker™ Device Cleaning System: Specially designed for Aneros prostate massagers and uses household ingredients. You do not need specialty cleaners, which makes routine cleaning easier to keep up with.

    Aneros Soaker™ Device Cleaning System

    Aneros Soaker™ Device Cleaning System

  • Aneros Soaker™ Device Cleaning System: Protects sensitive electronic charging components. This is why you should avoid soaking electronic parts in hot water or leaving them wet.

  • Aneros Soaker™ Device Cleaning System: Reusable and easy to use, with full surface area cleaning. One system covers repeated cleanings, so proper drying and storage directly extend its useful life.