Sodium D-line QUARK: Key Questions for Solar Observers

What is the Sodium D-line QUARK?

The Sodium D-line QUARK is an all-in-one solar filter assembly from DayStar that combines adapters, snouts, and the Sodium filter into a single, eyepiece-sized device. It uses Fabry Perot etalon technology to isolate the Sodium D-line (5890 Å) for high-resolution solar viewing.

What solar features can I see with it?

The Sodium D-line reveals high-resolution sunspot detail, plage, granulation, and possibly super-granulation depending on resolution and seeing conditions. It can also show flare footprints (flare kernels) where a flare begins and emits in Sodium before erupting in white light. The Sodium line is brighter than Calcium and Hydrogen Alpha, so exposures are very short.

What telescope focal ratio works with the QUARK?

The Sodium D-line QUARK is designed for use on refractors with focal ratios from F/4 to F/8. For these scopes, you simply insert the QUARK into your diagonal, add an eyepiece, and view—no additional configuration or adapters needed.

Does the QUARK need an Energy Rejection Filter (ERF)?

Yes. Safe operation requires an Energy Rejection Filter specific to your telescope. The QUARK is compatible with yellow glass ERFs offered by DayStar. Note that red glass ERF filters will not pass the Sodium line.

What other safety accessories are recommended?

Daystar also recommends using a UV/IR cut filter for safety. The QUARK assembly includes optimized AR coatings for the 589 nm wavelength and added baffles for contrast, but these do not replace the need for proper ERF and UV/IR filtering.

What is the bandpass of the Sodium D-line QUARK?

No specific FWHM bandpass is designated in the supplied information, but it will be around 0.5 Å or narrower. The exact bandpass may vary based on the final telescope application.

How is power consumption handled?

The QUARK design has reduced power consumption so it can operate all day off a small, palm-sized optional battery pack. This makes field use practical without needing a mains connection.

Is the QUARK ready to use out of the box?

The all-in-one design eliminates unnecessary components, weight, and costs. For F/4 to F/8 refractors, no adapters are needed—just insert into the diagonal, add an eyepiece, and view. However, you must still purchase a compatible ERF and UV/IR cut filter separately.

Sodium D-line QUARK Product Facts

  • Sodium D-line QUARK: The Sodium D-line QUARK uses DayStar Filters' Fabry Perot etalon technology and is optimized for the 589 nm wavelength. This confirms the filter is purpose-built for high-contrast views of solar features in the Sodium D-line, not a generic solar filter.

    Sodium D-line QUARK

    Sodium D-line QUARK

  • Sodium D-line QUARK: All sales of solar gear are final, so please choose your filter carefully and reach out with any questions. Because solar filters are specialized and non-returnable, it's important to verify compatibility with your telescope and ERF before purchasing.