What You Need Before Setup
Setting up the Solar Storm 24C Commercial Tanning Bed (220v) in your salon requires a few preparations. The bed arrives 98% pre-assembled for quick assembly, but you'll need a dedicated 220-volt circuit with a 20-amp breaker and a NEMA 6-20R receptacle. The bed uses a NEMA 6-20P plug, so confirm your salon's electrical setup matches before delivery.
The bed weighs 264 lbs and measures 78" L x 39" W x 48" H. Plan a location with enough clearance for the tunnel design and easy access for both clients and maintenance. The bed supports a tanner capacity of 350 lbs, so the bench and canopy are built for commercial use.
Electrical and Assembly Facts
-
Solar Storm 24C Commercial Tanning Bed (220v): Requires a 220-volt dedicated circuit with a 20-amp breaker and NEMA 6-20R receptacle. Ensuring the correct electrical setup before the bed arrives prevents delays and safety issues during installation.
Solar Storm 24C Commercial Tanning Bed (220v)
-
Solar Storm 24C Commercial Tanning Bed (220v): Delivered 98% pre-assembled for quick and easy assembly. Most of the assembly is done at the factory, so you can have the bed operational in a short time with basic tools.
-
Solar Storm 24C Commercial Tanning Bed (220v): Includes free liftgate delivery (value $75.00) and a comfort package with eye protection, bed cleaner, pillow, and $300 restaurant gift certificates. The included accessories reduce your initial costs and provide essentials for client comfort and bed maintenance.
Setup Steps for the Solar Storm 24C
Follow these steps to set up your Solar Storm 24C. The bed is designed for commercial environments, so the process is straightforward.
- Prepare the location: Choose a spot with enough room for the bed's dimensions (78" L x 39" W x 48" H) and ventilation. Ensure the floor can support 264 lbs and the bed is level.
- Verify electrical requirements: Confirm a 220-volt dedicated circuit with a 20-amp breaker and a NEMA 6-20R receptacle is available. The bed comes with a NEMA 6-20P plug; do not modify the plug or receptacle.
- Unpack and inspect: Unpack the bed and check for any shipping damage. The bed is 98% pre-assembled, so you only need to attach the canopy (if not already hinged) and any optional accessories like the redesigned Bluetooth speaker (which no longer mounts to the bed).
- Position and connect: Roll or lift the bed into position. Plug the bed into the NEMA 6-20R receptacle. Do not use an extension cord or adapter.
- Test the bed: Turn on the bed and verify the digital hour counter works. The timer is set for 20 minutes with standard lamps or 15 minutes with the Wolff Inferno upgrade. Confirm the lamps light evenly.
- Review the Tanning Training Agreement: Before using the bed commercially, you must read and understand the Tanning Training Agreement provided by the manufacturer. Contact an associate if you have questions.
Lamp Options and Timer Settings
The Solar Storm 24C comes with 24 Wolff high-output 100-watt lamps. Standard lamps are Wolff Sun Fusion with 6.5% UVB, rated for 1,000 hours (about 3,000 20-minute sessions). Upgrade to Wolff Inferno lamps (11.9% UVB, rated for 1,200 hours) for shorter 15-minute sessions. The timer is set accordingly, but you can adjust based on your salon's needs.
The bed uses efficient Fulham electronic ballasts that use 40% less energy, saving on electricity costs. The digital hour counter tracks lamp usage, helping you schedule replacements.
Warranty and Support
The Solar Storm 24C comes with a 36-month warranty on parts (ballasts, contactors, timers, fans), 180 days on labor, 90 days on acrylic and lamps, and a lifetime warranty on the frame. The bed is made in the U.S.A. and designed for commercial use. If you have questions about the Tanning Training Agreement, contact an associate for assistance.
