What the SquareHood Hammered Shutter Button Does

The SquareHood Hammered Brass and Copper Soft Shutter Button is a small accessory that sits on top of your camera's shutter button. Its flat head rises only 2mm from the shutter button, making it a discreet addition that gives you better control over pressing the shutter and activating autofocus. Made from solid brass or solid copper, it adds a tactile feel without adding bulk.

Product Facts That Affect Installation and Care

Installation Steps

Installing the SquareHood Shutter Button is straightforward. The button uses two rubber O-rings to secure it to your camera's shutter button. Follow these steps for a snug fit.

  1. Check your camera's shutter button size: The SquareHood button is 8mm in diameter. Measure your camera's shutter button to ensure it's roughly the same size or slightly smaller. If your shutter button is larger than 8mm, the accessory may not fit securely.
  2. Place the O-rings on the shutter button: Slide both O-rings onto your camera's shutter button. They should sit at the base of the button, creating a friction surface for the SquareHood button.
  3. Press the SquareHood button onto the shutter button: Align the SquareHood button over the shutter button and press down gently. The O-rings will grip the accessory and hold it in place. The flat head should sit flush or nearly flush with the shutter button.
  4. Test the fit: Press the SquareHood button to ensure it activates the shutter and autofocus without wobbling. If it feels loose, reposition the O-rings or check that they are not damaged.

Care and Maintenance for Brass and Copper

Solid brass and solid copper develop a natural patina over time due to exposure to air and oils from your hands. This is not a defect but a characteristic of the material. If you prefer the original shiny finish, you can polish the button with a soft cloth and a metal polish suitable for brass or copper. Avoid abrasive cleaners, as they can scratch the surface.

The rubber O-rings are the only parts that may need replacement over time. If they become dry or lose elasticity, the button may not stay secure. The catalog does not specify replacement intervals, so inspect the O-rings periodically and replace them if they show signs of wear.

What the Catalog Does Not Settle

The supplied information does not confirm compatibility with specific camera models. The 8mm diameter and 2mm rise are general dimensions; you should verify fit by measuring your camera's shutter button. The care instructions for patina are based on common knowledge of brass and copper, not on manufacturer-provided cleaning steps. For any specific care questions, refer to the product's packaging or contact the manufacturer.