Quick Answer
The SquareHood Model V for Fuji XF16mm f2.8 is a precision-machined aluminum hood that attaches directly to the lens filter thread. Follow the steps below for a secure fit and optimal flare protection.
Why Choose the SquareHood Model V
The SquareHood Model V is made from anodised aluminium, offering a durable yet lightweight alternative to the standard plastic Fuji hood. Its distinctive square shape reduces the chance of flare from side light while still allowing use of the optical viewfinder thanks to a cutout. This is especially useful for street and travel photographers who prefer composing through the viewfinder.
If you want something different from the standard Fuji lens hood or need better clearance for your fingers when adjusting filter rings, the SquareHood provides a practical upgrade without adding bulk.
Installation Steps
- 1. Remove the Existing Hood or Filter: If your lens has a standard Fuji hood or any filter attached, unscrew it counterclockwise. Clean the filter threads with a soft cloth to remove dust or debris. Common mistake: Forgetting to remove the step-up ring or adapter – the SquareHood threads directly into the 49mm filter thread of the XF 16mm f2.8.
- 2. Align the SquareHood with the Lens: Hold the SquareHood so the cutout notch is on the left side (when looking through the viewfinder). This aligns the opening with the optical viewfinder path. Checkpoint: The cutout should face the viewfinder side of the camera – not the grip side. Rotating it incorrectly will block your view.
- 3. Screw the Hood Clockwise: Gently place the hood onto the lens threads and rotate it clockwise until it is snug. Do not overtighten – hand-tight is sufficient. The hood will stop when fully seated. Common mistake: Over-tightening can cross-thread the aluminium threads. Stop as soon as you feel resistance.
- 4. Verify Fit and Function: Look through the optical viewfinder to confirm the cutout provides an unobstructed view. Check that the hood does not vignette at 16mm by taking a test shot at f/8. If you see dark corners, the hood may not be fully seated. Remove and re-install, ensuring it threads evenly.
Product Facts
-
SquareHood Lens Hood for FujiFilm XF 16mm f2.8 R WR: The SquareHood Model V for Fuji XF16mm f2.8 is a lens hood made from anodised aluminium. Aluminium construction makes it more durable and less prone to cracking than plastic hoods, while the cutout allows you to use the optical viewfinder without obstruction.
SquareHood Lens Hood for FujiFilm XF 16mm f2.8 R WR
With the SquareHood installed, you can shoot confidently in bright conditions with reduced flare and full access to your camera's optical viewfinder. Enjoy the unique look and solid feel of anodised aluminium on your Fuji XF 16mm f2.8.
