Why aftercare matters for a very soft silicone squishy

The Squishy Udder is made from extra-soft silicone with a 00-20 shore firmness, which is why it feels so satisfying to squeeze, poke, and prod. That same softness means the surface can pick up dust, lint, and oils more readily than firmer toys, so a little aftercare goes a long way.

This routine focuses on three steps: drying the silicone completely, using powder only if the surface feels tacky, and storing the Udder so it stays clean between sessions. The supplied product information does not include manufacturer cleaning or powdering instructions, so treat the steps below as practical habits rather than official directions.

Squishy Udder at a glance

  • Squishy Udder: Extra-soft silicone with 00-20 shore firmness, one-size, available in Classic Pink or custom colors. The very soft silicone is the reason drying and storage deserve extra attention: a tacky surface attracts dust quickly.

    Squishy Udder

    Squishy Udder

A simple aftercare routine for your Squishy Udder

These steps assume you have already cleaned the Udder with a method you trust. The goal here is to finish the job: remove moisture, manage tackiness, and put the squishy away properly.

  1. 1. Shake off excess water: After washing, give the Udder a gentle shake and pat it with a clean, lint-free towel. Avoid wringing or twisting the soft silicone.
  2. 2. Air-dry completely: Place the Udder on a clean, dry surface with good airflow and let it air-dry fully. Soft silicone can hold moisture in crevices, so give it time rather than rushing with heat.
  3. 3. Check for tackiness: Once dry, feel the surface. If it feels sticky or tacky, a light dusting of powder can help restore a smooth feel. If it feels clean and dry, you can skip powdering.
  4. 4. Powder lightly if needed: Sprinkle a small amount of plain, unscented powder onto the surface and spread it with clean fingers or a soft brush. Shake off any excess. The supplied information does not specify a recommended powder type, so choose one you are comfortable using on silicone.
  5. 5. Store clean and dry: Keep the Udder in a clean, dry place away from direct sunlight and sharp objects. A breathable pouch or a small container works well. Avoid sealing it away while damp.

Powdering tips that actually help

Powder is a tool for managing tackiness, not a required step every time. Over-powdering can leave a residue that feels unpleasant, so use it sparingly.

  • Use less than you think: Start with a small pinch and add more only if the surface still feels tacky. You can always add powder, but removing excess is messy.
  • Focus on sticky spots: Apply powder where the silicone feels tacky rather than coating the entire Udder.
  • Brush away excess: A soft, clean brush helps distribute powder evenly and remove clumps from the udder shapes.
  • Reapply only when needed: Powder wears off with handling. If the Udder starts feeling tacky again after a few sessions, a light reapplication is fine.

Storage that keeps your Squishy Udder ready

The best storage is simple: clean, dry, and protected from dust. Because the Udder is a novelty squishy rather than a display piece, a small breathable bag or a dedicated drawer spot works well. Avoid storing it pressed under heavy items, which can distort the soft silicone over time.

If you live in a humid climate, make sure the Udder is completely dry before storage. Trapped moisture is the most common cause of a musty smell or surface changes. The supplied information does not include specific storage instructions, so use your judgment and check the Udder periodically.

What the supplied information does not cover

The product record for the Squishy Udder does not include manufacturer cleaning, drying, powdering, or storage instructions. It also does not specify a recommended powder type or cleaning agents. If you need official guidance, contact the seller directly. The routine above is based on general best practices for soft silicone and the Udder's 00-20 shore firmness.