What the Stacking Kit Does
The PS Audio Stacking Kit for Subwoofer Pair is an accessory designed specifically for stacking a pair of subwoofers. It provides a stable, secure connection between two subwoofer cabinets, allowing you to place them vertically to save floor space and potentially improve bass response by coupling the drivers.
This guide walks through the installation process using the supplied components. The kit is offered as a single Standard option under SKU FDY-STACK-KIT.
Stacking Kit at a Glance
-
Stacking Kit for Subwoofer Pair: The PS Audio Stacking Kit for Subwoofer Pair is an accessory designed for stacking a pair of subwoofers. Confirms the kit's intended use and compatibility with two subwoofers.
Stacking Kit for Subwoofer Pair
-
Stacking Kit for Subwoofer Pair: It is offered as a single Standard option under SKU FDY-STACK-KIT. Simplifies ordering; there are no variant choices to make.
Installation Steps
Before starting, ensure both subwoofers are powered off and disconnected from the audio system. Place the bottom subwoofer on a stable, level surface. The stacking kit components are designed to fit between the subwoofer cabinets.
- 1. Position the bottom subwoofer: Place the first subwoofer where you want the stack to sit. Confirm the surface is sturdy and level.
- 2. Attach the stacking kit to the bottom subwoofer: Align the stacking kit's mounting points with the corresponding holes or recesses on the top of the bottom subwoofer. Secure the kit using the provided hardware. Tighten evenly but avoid over-torquing.
- 3. Place the top subwoofer: Carefully lift the second subwoofer and lower it onto the stacking kit, aligning the kit's top interface with the bottom of the upper subwoofer. Ensure it sits flush and level.
- 4. Secure the top subwoofer: Use the remaining hardware to fasten the top subwoofer to the stacking kit. Check that both subwoofers are firmly attached and the stack is stable.
- 5. Reconnect and test: Reconnect audio and power cables. Power on the system at a low volume and verify that both subwoofers operate correctly without vibration or rattling from the stack.
Honest Trade-Offs to Consider
Stacking subwoofers can save floor space and may improve bass coupling, but it also changes the acoustic interaction with the room. The stacked configuration places both drivers closer together, which can reinforce certain bass frequencies while canceling others depending on placement and room dimensions.
The supplied information does not include specific torque values or weight limits for the stacking kit. When in doubt, follow the manufacturer's instructions that come with your subwoofers and the kit. If your subwoofers have different mounting patterns, verify compatibility before installation.
