Quick answer

You can replace a worn or stretched headband on your SteelSeries Arctis Nova 7, 7X, or 7P with a cotton-rich elastic suspension band designed for these models. The swap takes about 10 minutes and restores a comfortable, secure fit.

Why replace the headband?

The original suspension band on the Arctis Nova series can lose elasticity over time, causing the headset to feel loose or sit unevenly. A fresh cotton-rich elastic band improves comfort and helps maintain consistent audio positioning.

A replacement also lets you adjust the fit with three size settings, which is useful if you share the headset or want a tighter or looser feel.

What you need

You only need the replacement headband and your headset. No tools are required—the band clips into the existing plastic frame without screws or adhesives.

Make sure you order a band that explicitly lists compatibility with SteelSeries Arctis Nova 7, 7X, 7P, and related models. The Brainwavz replacement headband (product ID 1706384) fits these models and uses a cotton-rich elastic material for breathability and durability.

Step-by-step replacement process

  1. Remove the old headband: Hold the headset with both hands. Gently pull each end of the old suspension band out of the plastic clips on the inner side of the headband arch. The band should slide out without force. If it is stuck, wiggle it side to side. Do not yank the band—it can damage the plastic clips. Work slowly.
  2. Attach one side of the new band: Take the new cotton-rich elastic band and hook one end into the plastic clip on the left side of the headband arch. Ensure the fabric side faces inward and the band lies flat. Check that the band is not twisted before securing the other side.
  3. Set the size and attach the other side: The replacement band has three size settings (small, medium, large). Choose the setting that matches your head size. Hook the free end into the right-side clip, then press firmly until it clicks into place. Start with the middle setting and adjust later if needed—it is easier than re-clipping.
  4. Test the fit: Put on the headset and check that the band sits evenly across your head. The headset should feel snug but not tight. Adjust the size by unhooking one side and moving to a different setting if necessary. If the headset tilts forward or backward, the band is likely uneven—re-seat both sides.

Product facts