Quick answer
For a clean, professional tent card display, use Stick N Glide FRE cards with their built-in adhesive strip — peel, position, and press for instant placement without messy glues or tape.
Why Stick N Glide works for table displays
The FRE (Floor Ready Endcap) design includes a pre-applied adhesive strip that holds cards securely on smooth surfaces like glass, acrylic, or laminate. This eliminates the need for separate adhesive dots or double-sided tape, saving setup time and reducing residue cleanup.
Because the adhesive is repositionable for the first few seconds, you can nudge the card into perfect alignment before it sets. This is especially useful when placing multiple cards in a row or grid pattern.
Surface preparation matters
The adhesive works best on clean, dry, dust-free surfaces. A quick wipe with a lint-free cloth and mild cleaner removes oils and debris that could weaken the bond. Avoid using ammonia-based cleaners on acrylic or polycarbonate surfaces, as they can cause clouding.
If you are placing cards on a textured or uneven surface, the adhesive may not hold as securely. In those cases, consider using a flat base or mounting board first.
Step-by-step setup guide
- Clean the surface: Wipe the area where the card will sit with a lint-free cloth and mild cleaner. Let it dry completely. A greasy surface is the most common reason the adhesive fails to hold.
- Peel the backing strip: Remove the protective liner from the adhesive strip on the back of the card. Avoid touching the adhesive with your fingers to keep it clean. If the adhesive picks up dust or lint before placement, its grip will weaken.
- Position and press: Hold the card at the desired angle (usually 90° for a tent shape) and press the adhesive strip firmly against the surface. Apply even pressure for 5–10 seconds. You have a few seconds to reposition the card before the bond sets — use that window to align it perfectly.
- Check the fold line: Ensure the card’s center crease is sharp and the two halves meet evenly. A weak crease can cause the card to slump or lean. Re-crease the fold with a bone folder or the edge of a ruler if the card does not stand upright.
- Test the display stability: Gently tap the card from the side to confirm it is secure. If it wobbles or lifts, press the adhesive again or move to a cleaner spot. Cards placed near high-traffic areas may need occasional re-pressing if bumped.
Product facts
-
STICK N GLIDE - FRE (10 PER PACK) 2-25: Merchandising Zone: 2, Size: 7 1/2'' x 5 3/4'' The 7.5 x 5.75 inch size fits standard table tent holders and shelf edge displays, making it a versatile choice for retail endcaps or event signage.
STICK N GLIDE - FRE (10 PER PACK) 2-25
