What the Stillpoints Mini Ultra Isolation Feet Are Made For

The Stillpoints Mini Ultra Isolation Feet are stainless steel, adjustable footers designed to provide a stable foundation and reduce noise transfer for audio equipment. They are sold in sets of four, enough for one speaker or one stand. Each foot screws directly into a 1/4\"-20 threaded insert, making them a direct fit for StackZilla stands or any component with that standard thread.

Installation Steps

The supplied information confirms the footers include a plastic wrench for installation and height adjustment. Follow these steps for a secure setup.

  1. Check your equipment for a 1/4\"-20 threaded insert: The Mini Ultra feet are designed to screw into a threaded 1/4\"-20 hole. They do not include a top piece for mounting to a flat surface, so the equipment must have the matching threaded insert.
  2. Prepare the feet and wrench: Each set contains four feet and one plastic wrench. The foot body height is 0.9 in (23 mm), plus a 0.4 in (10 mm) threaded stud. Use the plastic wrench to turn the foot—do not use metal tools that could damage the threads.
  3. Screw each foot into the threaded insert: Align the threaded stud of the foot with the 1/4\"-20 hole on your equipment. Turn clockwise by hand until snug, then use the plastic wrench for final tightening. Avoid over-tightening.
  4. Adjust height and level the equipment: The plastic wrench allows fine height adjustment. Turn each foot equally to keep the component level. The feet are adjustable, so you can compensate for uneven surfaces.

Key Specifications at a Glance

  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Foot body height: 0.9 in (23 mm), plus 0.4 in (10 mm) threaded stud length. Thread: 1/4\"-20. These dimensions confirm the feet fit into a standard 1/4\"-20 threaded insert and provide a low-profile isolation solution.

    Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount

    Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount

  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Includes plastic wrench for installation and height adjustment. Sold in sets of 4 only. The wrench ensures proper installation without damaging the stainless steel finish, and the set size matches single-speaker or single-stand needs.

  • Stillpoints Mini Ultra Isolation Feet 1/4"-20 mount: Note: these footers do not include a top piece for mounting to a flat surface; they are designed to screw into a threaded 1/4\"-20 hole. This means the feet are not for placing under flat-bottomed components—they require a threaded insert to attach securely.

Compatibility and Limitations

The Stillpoints Mini Ultra Isolation Feet are specifically for equipment with a 1/4\"-20 threaded insert. They are confirmed compatible with StackZilla stands, and any speaker or component with that thread. They are not designed for flat surfaces without a matching insert. The supplied information does not specify load capacity or recommended torque; use the plastic wrench and tighten by feel until the foot is snug.