What You Get in the Kit

The Stone Golem Miniature DIY kit from The Eye of the Ocean contains seven unpainted resin-cast components. The pieces are precision-crafted from a high-quality 3D model, so you can expect clean detail and good fit. The miniature assembles to approximately 16.5 × 12.5 × 14.5 cm (6.5 × 4.9 × 5.7 inches) — a substantial presence for any tabletop.

The material is white resin, which takes paint well but may need a primer for best adhesion. The kit is unassembled and unpainted, giving you full creative control over the final look. Assembly instructions are printed on the lid of the box, so keep the box handy.

Step-by-Step Assembly

Work on a clean, flat surface with good lighting. Lay out all seven components and compare them to the assembly diagram on the box lid.

  1. Check and clean parts: Inspect each piece for any flash or small mold lines. White resin is easy to trim with a hobby knife or fine sandpaper. Dry-fit the parts to see how they align before applying any glue.
  2. Glue the main body: Apply a small amount of cyanoacrylate (super glue) or two-part epoxy to the joints. Press and hold for a few seconds. Work from the core outward — attach the torso to the legs first, then the arms and head.
  3. Let the glue cure fully: Give the assembly at least a few hours to set before handling. The white resin is lightweight (400g total), so the model is stable once assembled.
  4. Fill any gaps (optional): If you see small seams after gluing, fill them with modeling putty or a thick primer. Sand smooth once dry.

Painting the Stone Golem

The Stone Golem's description calls it a "hulking guardian of ancient passageways" hewn from "rune-marked stone." That gives you a strong visual direction — earthy stone tones, weathered textures, and subtle rune highlights. White resin is a good base because it doesn't fight dark or light colors.

Start with a primer. A gray or black spray primer will give you even coverage and help shadows pop. After that, drybrush lighter stone colors (gray, tan, or ochre) over a dark base coat to bring out the carved details. For the runes, a thin wash of a contrasting color (like a pale blue or gold) can make them stand out without looking messy.

The kit is unpainted, so you can also leave it raw for a natural stone look, or seal it with a matte varnish for durability during gameplay.

Kit Specifications at a Glance

  • Stone Golem Miniature DIY: Assembled dimensions: approximately 16.5 × 12.5 × 14.5 cm (6.5 × 4.9 × 5.7 inches). This gives you a sense of the miniature's size on a game table or display shelf.

    Stone Golem Miniature DIY

    Stone Golem Miniature DIY

  • Stone Golem Miniature DIY: Material: white resin. Weight: 400g. White resin is lightweight and easy to paint, but may require primer for best paint adhesion.

  • Stone Golem Miniature DIY: 7 unpainted and unassembled components. Scale 1:70. Assembly instructions on the lid of the box. The kit is designed for hobbyists who enjoy assembly and painting; instructions are included.

  • Stone Golem Miniature DIY: 100 units produced. Limited edition. This is a collectible item; availability may be limited.

What the Catalog Does Not Tell You

The supplied information does not specify recommended paints, glue types, or painting techniques. Use standard hobby paints and adhesives suitable for resin miniatures. The assembly instructions are on the box lid, but no step-by-step written guide is included in the catalog record. For best results, work slowly and test fit before gluing.