Quick answer

To store cigars in an acrylic cigar jar, first confirm the jar seals well, then add a humidification device and a calibrated hygrometer. Keep the jar out of direct sunlight and refill or recharge the humidifier regularly to hold a stable environment.

Why acrylic jars need a humidification plan

Acrylic jars are not airtight like some wooden humidors, and they do not buffer humidity the way Spanish cedar does. That means you must supply and monitor humidity yourself. Without a humidification device, cigars can dry out or become too damp, especially in changing room conditions.

Seasoning an acrylic humidor: what it actually means

Unlike wooden humidors, acrylic jars do not need traditional seasoning with distilled water to swell the material. However, you should clean the jar and let it air out before first use, then stabilize humidity with your device before adding cigars. Skipping this step can leave plastic odors or inconsistent humidity.

Jar care that protects your cigars

Clean the jar with mild soap and warm water, rinse thoroughly, and dry completely before refilling. Avoid harsh chemicals or abrasive pads that can scratch the acrylic. Check the seal and lid regularly for cracks or warping, and store the jar in a stable spot away from heat sources.

Step-by-step: storing cigars in an acrylic jar

  1. Clean and dry the jar: Wash the jar and lid with mild soap and warm water, rinse well, and let both air-dry completely. Common mistake: skipping the dry step leaves moisture that can spike humidity or cause mold. Make sure no soap residue or water droplets remain before adding anything else.
  2. Add a humidification device: Place a properly sized humidifier, such as a Boveda pack or gel bead unit, inside the jar. Common mistake: using a device that is too large or too small for the jar's volume, which makes humidity hard to control. Follow the device's instructions for the jar size; when in doubt, start smaller and monitor.
  3. Place a hygrometer inside: Put a calibrated digital hygrometer in the jar so you can read humidity without opening it. Common mistake: trusting an uncalibrated analog gauge, which can be off by several points. Calibrate your hygrometer before relying on its readings.
  4. Let humidity stabilize before adding cigars: Close the jar and wait until the hygrometer holds a steady reading for several hours. Common mistake: adding cigars immediately, which can expose them to unstable humidity. Stabilize first; then add cigars in a single layer if possible.
  5. Arrange cigars and close the lid: Place cigars inside without overcrowding, and seal the lid firmly. Common mistake: packing cigars too tightly, which restricts air circulation and can cause uneven humidity. Leave a little space between cigars for air movement.
  6. Monitor and maintain regularly: Check the hygrometer daily for the first week, then weekly. Recharge or replace the humidifier when humidity drops, and clean the jar every few months. Common mistake: ignoring gradual humidity swings until cigars are already damaged. Keep a simple log of humidity readings to spot trends early.

Product facts

  • Humidor Acrylic Cigar Jar: Clear acrylic construction lets you view the contents without opening the jar. You can check cigars and humidity levels at a glance, reducing how often you open the jar and disturb the internal environment.

    Humidor Acrylic Cigar Jar

    Humidor Acrylic Cigar Jar